Do not use my calculations, they are not correct. Wait for Patrick to provide the correct values for each resistor. 👍
For RickRay MOSFETs :
R1 = 10k
R2 = 10.2k
R3 = 6.2k
R4 = 5.6k
R3t, R4t are only meant for fine trimming in circuit.
See also :
https://www.diyaudio.com/community/...or-fc-cen-iv-through-hole.392487/post-7198341
Patrick
RickRay,
Maybe you could consider bulk purchasing R1~R4 and supply them together with the MOSFETs ?
Patrick
Maybe you could consider bulk purchasing R1~R4 and supply them together with the MOSFETs ?
Patrick
Update - I'm waiting to receive the boards and build guide before shipping anything out to ensure I have everything correct.
Thanks RR. You are doing us a great favor procuring these MFets and possible resistors. Please let us know when to PM you our shipping address and PP info.
Best regards,
Best regards,
alazira - 2
PJN - 2
WCWC - 1
Paddy Garcia - 1
thirdicomplex - 1
manniraj - 1
Malvin - 1
Kokanee -3
tadek -4
hirscwi - 1 set
BEYoung -3 ( if I have enough sets left over)
Diyfan -1
Johnny Canuck - 2 sets
PJN - 2
WCWC - 1
Paddy Garcia - 1
thirdicomplex - 1
manniraj - 1
Malvin - 1
Kokanee -3
tadek -4
hirscwi - 1 set
BEYoung -3 ( if I have enough sets left over)
Diyfan -1
Johnny Canuck - 2 sets
alazira - 2
PJN - 2
WCWC - 1
Paddy Garcia - 1
thirdicomplex - 1
manniraj - 1
Malvin - 1
Kokanee -3
tadek -4
hirscwi - 1 set
BEYoung -3 ( if I have enough sets left over)
Diyfan -1
Johnny Canuck - 2 sets
codyt - 2 sets
PJN - 2
WCWC - 1
Paddy Garcia - 1
thirdicomplex - 1
manniraj - 1
Malvin - 1
Kokanee -3
tadek -4
hirscwi - 1 set
BEYoung -3 ( if I have enough sets left over)
Diyfan -1
Johnny Canuck - 2 sets
codyt - 2 sets
alazira - 2
PJN - 2
WCWC - 1
Paddy Garcia - 1
thirdicomplex - 1
manniraj - 1
Malvin - 1
Kokanee -3
tadek -4
hirscwi - 1 set
BEYoung -3 ( if I have enough sets left over)
Diyfan -1
Johnny Canuck - 2 sets
codyt - 2 sets
ZUM911 - 1
PJN - 2
WCWC - 1
Paddy Garcia - 1
thirdicomplex - 1
manniraj - 1
Malvin - 1
Kokanee -3
tadek -4
hirscwi - 1 set
BEYoung -3 ( if I have enough sets left over)
Diyfan -1
Johnny Canuck - 2 sets
codyt - 2 sets
ZUM911 - 1
Update - I have enough information to start the process. Each set will consist of 2- ZVP4424 matched within .003mV, 2- ZVN3306 matched within .003mV, 2- R1 10K, 2- R2 10.2K, 2- R3 6.2K, 2- R4 5.6K. Cost is $10.00 per set and $10.00 shipping. The initial cost estimate was for half the number needed and did not include the eight resistors.
If still interested reply to me PM/Conversation with:
NAME
ADDRESS
Paypal e-mail address
I will send an invoice to your PayPal and will ship after it is paid.
BTW, I won't receive the resistors until this Wednesday at the earliest.
If still interested reply to me PM/Conversation with:
NAME
ADDRESS
Paypal e-mail address
I will send an invoice to your PayPal and will ship after it is paid.
BTW, I won't receive the resistors until this Wednesday at the earliest.
Update - Please mark this is for friends or family. I consider you all friends or family and I like getting the extra change.
Update - If I did not send enough resistors, send me a PM. I may have miscounted on some of the multiple set orders. I can send them first class mail.
Update - The sheet sent with the MOSFET's has the values of each MOSFET written down. The N-Channel are 2.______, meaning 2.***Vgs. The P-Channel are 1._____, meaning 1.***Vgs. The MOSFETS themselves just have the last 3 numbers on them.
- Home
- Group Buys
- Group Buy for mosfets for FC CEN IV through hole US and Canada ONLY