Hi Patrick
Do you want to say that the XT1086 is not in production anymore with that statement ?
Or are you refering to the different clones of the QSC waveguide ?
Regards
Charles
Do you want to say that the XT1086 is not in production anymore with that statement ?
Or are you refering to the different clones of the QSC waveguide ?
Regards
Charles
That top measurement is BMS 4538? On JMLC-1000? I know this thread is so old but seems that stuff is still available-and the measurement is quite ripple free for a horn. VERY ripple free, which my superstition (driven by an old paper about cepstral analysis) says means better time domain response...
How high up in frequency does that go? Have you ever made measurements? I'm very curious.
They're on an old laptop somewhere, but it was close to 20k. They don't sound dull(or bright) by any means.
I think I figured out what the issue is. From what I've heard, people can't see links from imgur unless they have an account.
Alternatively, the poster (me) can modify the URLs.
I've started modifying my URLs going forward. But if you can't see the pics I post, try signing up for an imgur account and see if that helps. It takes all of two minutes to sign up.
I'm missing solutions for Midrange,
like this
Sonitus MR8XT Mid Range Horn with high efficiency 8 inch driver | Lautsprecherteile.de
Sonitus has a WG for Tweeter too: Sonitus EH-160
like this
Sonitus MR8XT Mid Range Horn with high efficiency 8 inch driver | Lautsprecherteile.de
Sonitus has a WG for Tweeter too: Sonitus EH-160
Last edited:
In UK you have these guys: Log into Facebook
And then the copies from Chinese manufacturers.
The original ES1.0 | ES | Products | KV2 Audio
The copy ProHSaudio KV400 High And Middle Range Horn for PRO Audio Cabinet 400L*400W*209H , Parts & Accessories For Audio Speaker|Speaker Accessories| - AliExpress
Not sure who these are a copy of but looks nice. ProHSaudio Cinema Speaker Horn Mf+Hf ,Size 428.6L*414.6W* 98H,1'',HF 1", MF C/146 Throat|Speaker Accessories| - AliExpress
And then there is a bunch of function-one copies..
I’m not saying it’s right to support theft of intellectual property and so on but, who am I to judge?
And then the copies from Chinese manufacturers.
The original ES1.0 | ES | Products | KV2 Audio
The copy ProHSaudio KV400 High And Middle Range Horn for PRO Audio Cabinet 400L*400W*209H , Parts & Accessories For Audio Speaker|Speaker Accessories| - AliExpress
Not sure who these are a copy of but looks nice. ProHSaudio Cinema Speaker Horn Mf+Hf ,Size 428.6L*414.6W* 98H,1'',HF 1", MF C/146 Throat|Speaker Accessories| - AliExpress
And then there is a bunch of function-one copies..
I’m not saying it’s right to support theft of intellectual property and so on but, who am I to judge?
Last edited:
I don't get the funktion one copies, surely they are useless without the special driver that the phase plug screws into?
Whenever I have found a function one clone there is usually driver for sale to.
ProHSaudio R2 8" MF Drivers 16 Ohm 400W Continuous Program Power,Neodymium Diaphragm Magnet
ProHSaudio R2 8" MF Drivers 16 Ohm 400W Continuous Program Power,Neodymium Diaphragm Magnet|Speaker Accessories| - AliExpress
Looks impressive doesn’t it?
ProHSaudio R2 8" MF Drivers 16 Ohm 400W Continuous Program Power,Neodymium Diaphragm Magnet
ProHSaudio R2 8" MF Drivers 16 Ohm 400W Continuous Program Power,Neodymium Diaphragm Magnet|Speaker Accessories| - AliExpress
Looks impressive doesn’t it?
I don't get why anybody would want Funktion One copies like these:
HORN 3PC Als Ein Satz Ohne Halterung Fur Pro Audio System, linie Array Horn Von Teile & Zubehor Fur Audio Lautsprecher|Speaker Accessories| - AliExpress
The originals sound terrible IMO.
Oddly enough they are kinda ok about 30deg off axis but on axis the sound is just really bad.
Last edited:
Res2 aint that balanced directivity wise, midrange narrows from 2k, xo point is 5.77k and tweeter is wide
The ones I heard were either Res 2 or 4 in open air.
Wasn't a problem of directivity/level. On axis the upper mids sounded strangely distorted and much cleaner off axis.
Wasn't a problem of directivity/level. On axis the upper mids sounded strangely distorted and much cleaner off axis.
quick simulation from res2, different compression driver but you get the point from midrange directivity
I have no reason to doubt directivity issues but it still was clearly audible distortion that is my issue with them.