I have a GFA-555 transformer, and all the secondaries are figured out, but I can't figure out the primary side of it.
Blk/Blu are in series.
Yel/Wht are in series.
It has a Brown, red, Org left. Where do I hook up 120, and nuetral?
1.3 Ohms between
Org/red, and Org/brown
.5ohms between Brn/red
Can I use 2 seperate 120(240) for more VA?
thanks
Ben
Blk/Blu are in series.
Yel/Wht are in series.
It has a Brown, red, Org left. Where do I hook up 120, and nuetral?
1.3 Ohms between
Org/red, and Org/brown
.5ohms between Brn/red
Can I use 2 seperate 120(240) for more VA?
thanks
Ben
OK I did a little playing around. I put some power to it. BIG BUZZ. This thing came out of a blown amp. The bridge rectifier was shot!.
OK so I have it hooked up to hot on the brown, and nuetral on the orange. I get 70vac on all outs. The only concern I have is 64vdc per out rectified. The red on what I thought was the primary is 24vac for the low voltage systems. I think this all checks out.
Thanks
Ben
OK so I have it hooked up to hot on the brown, and nuetral on the orange. I get 70vac on all outs. The only concern I have is 64vdc per out rectified. The red on what I thought was the primary is 24vac for the low voltage systems. I think this all checks out.
Thanks
Ben
Searching this board, it appears that user "Mayank" has the service manual for this amp. You might send him an email.
Alternatively, this web company sells various service manuals.
Alternatively, this web company sells various service manuals.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Power Supplies
- GFA-555 transformer help