just paid for:
- 1x Hypnotize BE ......... 15.00$
- 4x SSR 1.1 BiB PS ...... 76.00$
- 4x Minikits IRF+.......... 36.00$
- 2x Minikits IRF- .......... 17.00$
- Shipping 4-6 boards....... 8,00$
- Donation ..................... 3.00$
Total....................... 155.00$
Thanks, Michael
- 1x Hypnotize BE ......... 15.00$
- 4x SSR 1.1 BiB PS ...... 76.00$
- 4x Minikits IRF+.......... 36.00$
- 2x Minikits IRF- .......... 17.00$
- Shipping 4-6 boards....... 8,00$
- Donation ..................... 3.00$
Total....................... 155.00$
Thanks, Michael
switched 1 IRF pos supply kit for 1 LV pos supply
updated spreadsheet
hope its not too late.
thanks
updated spreadsheet
hope its not too late.
thanks
switched 1 IRF pos supply kit for 1 LV pos supply
updated spreadsheet
hope its not too late.
thanks
Updated your envelope. Last night to order stuff.
Just paid for:
1 X Salas Shunt Regulator 1.1 Bib PS PCB $19
2 X BiB IRF positive supply minikit $18
1 X Bib IRF negative supply minikit $8.50
1X Shipping 3 boards $6.00
Donation $3.50
TOTAL $55.00
1 X Salas Shunt Regulator 1.1 Bib PS PCB $19
2 X BiB IRF positive supply minikit $18
1 X Bib IRF negative supply minikit $8.50
1X Shipping 3 boards $6.00
Donation $3.50
TOTAL $55.00
OK Thanks Salas,my intent was to have completely separate wire runs from the regs to the two circuit boards,therefore the wires would meet at the regs output pads.1. There should be thick Voltage & ground links between those boards so the force and ground wires will meet at those links middle.
Teabag,
Just paid for (4) BIB boards, shipping and $6.00 donation to DIYAudio. Thanks again for making the logistics of another excellent Salas/Teabag/CRT Group Buy possible!😀
Dave
Just paid for (4) BIB boards, shipping and $6.00 donation to DIYAudio. Thanks again for making the logistics of another excellent Salas/Teabag/CRT Group Buy possible!😀
Dave
TeaBag, apologies but I have amended my order to:
1 X Salas Shunt Regulator 1.1 Bib PS PCB $19
1 X BiB IRF positive supply minikit $9.50
1 x LV positive supply minikit $8.50
1 X LV negative supply minikit $8.50
1X Shipping 3 boards $6.00
Donation $4.00
TOTAL $55.00
I have updated the spreadsheet.
Thanks
1 X Salas Shunt Regulator 1.1 Bib PS PCB $19
1 X BiB IRF positive supply minikit $9.50
1 x LV positive supply minikit $8.50
1 X LV negative supply minikit $8.50
1X Shipping 3 boards $6.00
Donation $4.00
TOTAL $55.00
I have updated the spreadsheet.
Thanks
Order 1 BiB shunt reg 19.00 USD 2 IRF pos kits 18.00 USD 1 IRF neg kits 8.50 USD Shipping 6.00 USD Total 51.50 USD Not sure of the difference 'tween the IRF regs and the low-voltage regs? Is it just IRF mosfet vs. BJT? I'm using them for TP Sabre DAC +-15V and +5V .
PAYPAL SENT
PAYPAL SENT
Last edited:
Both have merits, their impact on Zo value and shape in frequency is depicted in the instructions. The more discerning builders will try both and compare in their applications looking for clues I am sure. The boards take Vref, filtering, and PowerOut possibilities worth to explore in practice.
Just paid for:
- 2x SSR 1.1 BiB PS ...... 38.00$
- 2x Minikits IRF+.......... 18.00$
- 2x Minikits IRF- .......... 17.00$
- 2x Minikits BJT+ .......... 17.00$
- Shipping 1-3 boards....... 6.00$
Total = 96$
- 2x SSR 1.1 BiB PS ...... 38.00$
- 2x Minikits IRF+.......... 18.00$
- 2x Minikits IRF- .......... 17.00$
- 2x Minikits BJT+ .......... 17.00$
- Shipping 1-3 boards....... 6.00$
Total = 96$
I paid for
3 reg poard
2 irf positive kit
2 irf negative kit
1 $8.50
1 $8 s/h
I'm sorry I messed up on kits order. I wanted 5v LV positive kit so I assume what it in the next line. I put 1 in the cell but realize now what it got different description. I paid 8.50. Please correct my order.
Vladco
3 reg poard
2 irf positive kit
2 irf negative kit
1 $8.50
1 $8 s/h
I'm sorry I messed up on kits order. I wanted 5v LV positive kit so I assume what it in the next line. I put 1 in the cell but realize now what it got different description. I paid 8.50. Please correct my order.
Vladco
Okay, GB is closed. Anyone who had a PM unanwered, you still have the opportunity to buy.
The spreadsheet will be offline so I can made modifications.
The spreadsheet will be offline so I can made modifications.
I added to the sheet and sent paypal on June 12, but I didn't post here.
#112
1 hypnotize blue 15.00 USD
3 BiB shunt reg 57.00 USD
4 IRF pos kits 36.00 USD
3 IRF neg kits 25.50 USD
2 BJT ps kits 17.00 USD
Shipping 8.00 USD
donation 6.50 USD
165 total.
Thank you so much for taking the time and putting in the effort to put this together.
Aaron.
#112
1 hypnotize blue 15.00 USD
3 BiB shunt reg 57.00 USD
4 IRF pos kits 36.00 USD
3 IRF neg kits 25.50 USD
2 BJT ps kits 17.00 USD
Shipping 8.00 USD
donation 6.50 USD
165 total.
Thank you so much for taking the time and putting in the effort to put this together.
Aaron.
Stuff is all ordered.
$90 donation to Diyaudio done.
Transaction Details
Web Accept Payment Sent (Unique Transaction ID #3C279130F57337131)
Business Name:
diyAudio (The recipient of this payment is Non-U.S. - Verified)
Email:
da.sales == diyaudio.com
Payment Sent to:
donations == diyaudio.com
Total amount:
-$90.00 USD
Fee amount:
$0.00 USD
Net amount:
-$90.00 USD
$90 donation to Diyaudio done.
Transaction Details
Web Accept Payment Sent (Unique Transaction ID #3C279130F57337131)
Business Name:
diyAudio (The recipient of this payment is Non-U.S. - Verified)
Email:
da.sales == diyaudio.com
Payment Sent to:
donations == diyaudio.com
Total amount:
-$90.00 USD
Fee amount:
$0.00 USD
Net amount:
-$90.00 USD
Tea Bag,
Did you get my convoluted mess sorted? My info was deleted from my Paypal transfer by mistake. Just want to make sure it was not lost.
DaveM
Did you get my convoluted mess sorted? My info was deleted from my Paypal transfer by mistake. Just want to make sure it was not lost.
DaveM
Looking at parts for my (soon to come) BiB regs.
Yum. I love shopping for components.
Has anybody used a 10,000uF cap they recommend in these regs before, that is a good option for 200mA current? (A la DCB1 - hotrod Dale 10R 5W resistor)
I need 9x so I need to keep the costs down, but I still want something good...

Has anybody used a 10,000uF cap they recommend in these regs before, that is a good option for 200mA current? (A la DCB1 - hotrod Dale 10R 5W resistor)
I need 9x so I need to keep the costs down, but I still want something good...
- Home
- Group Buys
- GB Thread for Salas SSLV1.1 BiB shunt reg