• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

GB: Round #6; Fo-Felix AC Filter

Jump to Latest
#44
dualuxe said:
Destroyer, it would be nice to add a solder connection for L and N in and out underneath the screw terminal locations.
Click to expand...

That may be doable, but to be clear you'd still be paying for the screw terminals because I can't order any less of them at a time. What I mean is the total price would remain the same. I'm not going to personally pay for a load of connectors that sit in a box.

Also you can get much better tension from the terminals. They're copper and can be tightened real well. They're also very stable since they mount at 4 points. They have enough room to daisy chain 12AWG easily as well.
 
#45
I’m fine paying for the terminals with the board. It’s your GB and you can do it as you wish. But my preference would be solder connections for L and N in and out. Can you fit two holes at each L and N input for daisy chaining?
 
#46
We've thought about it and decided it's just not worth it to add holes. We originally made it the way we wanted because it's a superior connection that's much safer, and we're going to stick to that. If you wanted a custom order with a min amount we can talk.
 
#58
There's only 18 unclaimed, but not all of the 82 are paid for yet. (The connectors are ordered in multiples of 100, so 200 per 100 PCBs)

I'll update if some go unpaid for, but so far I suggest if you want some to put in now or wait till probably later in the year if enough people want them then.
 
You must log in or register to reply here.
Top Bottom