Hi Francois,
Following your request I have modified the PCB of the EL84 Baby Huey to include a jumper to give you the choice of 12AX7 or 6N2P input tube
I know the 6N1P (ECC82) and the 6N2P (ECC83) and, depending of the supplier, I agree that there are very good ones, I have already used them with the jumper feature in my line preamplifier as you can see on the picture...
Best regards,
Marc
Thanks again Marc. Did you do the jumper for the EL34 board as well?
I don't understand why i am not getting any notifications for this GB thread...
whereas i am getting notifications for threads where i haven't visited for quite a while...
Strange..as i depend on email notifications for response, especially GB threads...
Anyway rothigro your request is noted, thanks for your interest!
regards
Prasi
I understand DIYA is currently going through some serious email notification problems, hope it will be restored asap to as it was earlier.
whereas i am getting notifications for threads where i haven't visited for quite a while...
Strange..as i depend on email notifications for response, especially GB threads...
Anyway rothigro your request is noted, thanks for your interest!
regards
Prasi
I understand DIYA is currently going through some serious email notification problems, hope it will be restored asap to as it was earlier.
LIST FOR BHEL84
meanie 4 nos
Bfpca 4 nos
overtheairbroadcast 4 nos
odie1427 2 nos.
xbitwise 2 nos.
nerdorama 2 nos.
SCD 4 nos.
TIC37 4 nos.
bandol83 2 nos.
pvphil 2 nos.
vasillis 6 nos.
Carrier Bag Man 4 nos.
jcastellano 2 nos.
baker8 4 nos
demetrios 2 nos.
Francois G 4 nos.
jj506 2 nos.
matejsirk 2 nos.
RKH 2 nos.
sunil 2 nos.
papavienneau 2 nos.
Avellano 2 nos.
JRKO 2 nos.
analogadikt 2 nos.
yoaudio 2 nos.
raymondj 4 nos.
potepuh 2 nos.
e_fortier 2 nos.
skippyboy 2 nos.
rongon 2 nos.
Ray Waters 2 nos.
kosi 2 nos.
rpeter 2 nos.
rothigro 2 nos.
Vunce 4 nos.
Kokanee 4 nos.
Total: 98 nos.
GB3 List for BHEL34
dtaylo3 4 nos.
invaderzim 2nos.
mike567 2nos.
bert61 2nos.
demetrios 2nos.
sunil 2nos.
Francois G 4nos
jj506 2nos.
TIC37 4nos.
Avellano 2nos.
analogadikt 2 nos.
raymondj 4nos.
Frankgh 2nos.
kosi 2nos.
Total: 36 nos.
Regards
Prasi
meanie 4 nos
Bfpca 4 nos
overtheairbroadcast 4 nos
odie1427 2 nos.
xbitwise 2 nos.
nerdorama 2 nos.
SCD 4 nos.
TIC37 4 nos.
bandol83 2 nos.
pvphil 2 nos.
vasillis 6 nos.
Carrier Bag Man 4 nos.
jcastellano 2 nos.
baker8 4 nos
demetrios 2 nos.
Francois G 4 nos.
jj506 2 nos.
matejsirk 2 nos.
RKH 2 nos.
sunil 2 nos.
papavienneau 2 nos.
Avellano 2 nos.
JRKO 2 nos.
analogadikt 2 nos.
yoaudio 2 nos.
raymondj 4 nos.
potepuh 2 nos.
e_fortier 2 nos.
skippyboy 2 nos.
rongon 2 nos.
Ray Waters 2 nos.
kosi 2 nos.
rpeter 2 nos.
rothigro 2 nos.
Vunce 4 nos.
Kokanee 4 nos.
Total: 98 nos.
GB3 List for BHEL34
dtaylo3 4 nos.
invaderzim 2nos.
mike567 2nos.
bert61 2nos.
demetrios 2nos.
sunil 2nos.
Francois G 4nos
jj506 2nos.
TIC37 4nos.
Avellano 2nos.
analogadikt 2 nos.
raymondj 4nos.
Frankgh 2nos.
kosi 2nos.
Total: 36 nos.
Regards
Prasi
Prices will be same for both designs (EL34 and EL84), thanks to Marc, who maintained same PCB size for both.
PCB specs will also be same 2.4mm thick FR-4, 70 um Copper, ENIG and green mask.
Total delivered prices for any design, in any combination,
2 PCBs~ 24-26 USD
4 PCBs~ 40-42 USD
6 PCBs~ 62 USD
These are approx prices depending upon country to be shipped. Invoice will have final amount.
regards
Prasi
PCB specs will also be same 2.4mm thick FR-4, 70 um Copper, ENIG and green mask.
Total delivered prices for any design, in any combination,
2 PCBs~ 24-26 USD
4 PCBs~ 40-42 USD
6 PCBs~ 62 USD
These are approx prices depending upon country to be shipped. Invoice will have final amount.
regards
Prasi
LIST FOR BHEL84
meanie 4 nos
Bfpca 4 nos
overtheairbroadcast 4 nos
odie1427 2 nos.
xbitwise 2 nos.
nerdorama 2 nos.
SCD 4 nos.
TIC37 4 nos.
bandol83 2 nos.
pvphil 2 nos.
vasillis 6 nos.
Carrier Bag Man 4 nos.
jcastellano 2 nos.
baker8 4 nos
demetrios 2 nos.
Francois G 4 nos.
jj506 2 nos.
matejsirk 2 nos.
RKH 2 nos.
sunil 2 nos.
papavienneau 2 nos.
Avellano 2 nos.
JRKO 2 nos.
analogadikt 2 nos.
yoaudio 2 nos.
raymondj 4 nos.
potepuh 2 nos.
e_fortier 2 nos.
skippyboy 2 nos.
rongon 2 nos.
Ray Waters 2 nos.
kosi 2 nos.
rpeter 2 nos.
rothigro 2 nos.
Vunce 4 nos.
Kokanee 4 nos.
mkm 2 nos.
Total: 100 nos.
GB3 List for BHEL34
dtaylo3 4 nos.
invaderzim 2nos.
mike567 2nos.
bert61 2nos.
demetrios 2nos.
sunil 2nos.
Francois G 4nos
jj506 2nos.
TIC37 4nos.
Avellano 2nos.
analogadikt 2 nos.
raymondj 4nos.
Frankgh 2nos.
kosi 2nos.
yoaudio 2nos.
Total: 38 nos. ( 40 pcbs ordered)
The GB is closed for present, 100 pcb for el84 and 40 pcb for el34....
Its all i can invest right now..., sorry.
If there is no response from some members, i will send the pcbs to other interested members.. please make a reserve list if you want pcbs...
regards
prasi
meanie 4 nos
Bfpca 4 nos
overtheairbroadcast 4 nos
odie1427 2 nos.
xbitwise 2 nos.
nerdorama 2 nos.
SCD 4 nos.
TIC37 4 nos.
bandol83 2 nos.
pvphil 2 nos.
vasillis 6 nos.
Carrier Bag Man 4 nos.
jcastellano 2 nos.
baker8 4 nos
demetrios 2 nos.
Francois G 4 nos.
jj506 2 nos.
matejsirk 2 nos.
RKH 2 nos.
sunil 2 nos.
papavienneau 2 nos.
Avellano 2 nos.
JRKO 2 nos.
analogadikt 2 nos.
yoaudio 2 nos.
raymondj 4 nos.
potepuh 2 nos.
e_fortier 2 nos.
skippyboy 2 nos.
rongon 2 nos.
Ray Waters 2 nos.
kosi 2 nos.
rpeter 2 nos.
rothigro 2 nos.
Vunce 4 nos.
Kokanee 4 nos.
mkm 2 nos.
Total: 100 nos.
GB3 List for BHEL34
dtaylo3 4 nos.
invaderzim 2nos.
mike567 2nos.
bert61 2nos.
demetrios 2nos.
sunil 2nos.
Francois G 4nos
jj506 2nos.
TIC37 4nos.
Avellano 2nos.
analogadikt 2 nos.
raymondj 4nos.
Frankgh 2nos.
kosi 2nos.
yoaudio 2nos.
Total: 38 nos. ( 40 pcbs ordered)
The GB is closed for present, 100 pcb for el84 and 40 pcb for el34....
Its all i can invest right now..., sorry.
If there is no response from some members, i will send the pcbs to other interested members.. please make a reserve list if you want pcbs...
regards
prasi
Hello Francois,
Its been my experience that sometimes few members because of change in location, job, personal reasons, etc may no longer be interested in pcbs as there is quite a time gap from booking of pcb to manufacturing... So in such cases I release excess pcbs to other members who are on reserve list or if there is sufficient interest, I manufacture one more batch in the future..Its how I have been doing GBs, and I need to ensure that I am not left with stock of pcbs, cant afford to
.
once pcbs are delivered to me, I will send out PM to get paypal and address details and subsequently send out a paypal invoice.
So, there is no need for reconfirmation.. Sorry if I havent been clear with my earlier post.
regards
Prasi
Its been my experience that sometimes few members because of change in location, job, personal reasons, etc may no longer be interested in pcbs as there is quite a time gap from booking of pcb to manufacturing... So in such cases I release excess pcbs to other members who are on reserve list or if there is sufficient interest, I manufacture one more batch in the future..Its how I have been doing GBs, and I need to ensure that I am not left with stock of pcbs, cant afford to
. once pcbs are delivered to me, I will send out PM to get paypal and address details and subsequently send out a paypal invoice.
So, there is no need for reconfirmation.. Sorry if I havent been clear with my earlier post.
regards
Prasi
LIST FOR BHEL84
meanie 4 nos
Bfpca 4 nos
overtheairbroadcast 4 nos
odie1427 2 nos.
xbitwise 2 nos.
nerdorama 2 nos.
SCD 4 nos.
TIC37 4 nos.
bandol83 2 nos.
pvphil 2 nos.
vasillis 6 nos.
Carrier Bag Man 4 nos.
jcastellano 2 nos.
baker8 4 nos
demetrios 2 nos.
Francois G 4 nos.
jj506 2 nos.
matejsirk 2 nos.
RKH 2 nos.
sunil 2 nos.
papavienneau 2 nos.
Avellano 2 nos.
JRKO 2 nos.
analogadikt 2 nos.
yoaudio 2 nos.
raymondj 4 nos.
potepuh 2 nos.
e_fortier 2 nos.
skippyboy 2 nos.
rongon 2 nos.
Ray Waters 2 nos.
kosi 2 nos.
rpeter 2 nos.
rothigro 2 nos.
Vunce 4 nos.
Kokanee 4 nos.
mkm 2 nos.
Total: 100 nos.
GB3 List for BHEL34
dtaylo3 4 nos.
invaderzim 2nos.
mike567 2nos.
bert61 2nos.
demetrios 2nos.
sunil 2nos.
Francois G 4nos
jj506 2nos.
TIC37 4nos.
Avellano 2nos.
analogadikt 2 nos.
raymondj 4nos.
Frankgh 2nos.
kosi 2nos.
yoaudio 2nos.
analogadikt 2nos.
Total: 40 nos. ( 40 pcbs ordered)...
The GB is closed for present...
Reserve list (BHEL84)
analogadikt 2nos.
regards
prasi
meanie 4 nos
Bfpca 4 nos
overtheairbroadcast 4 nos
odie1427 2 nos.
xbitwise 2 nos.
nerdorama 2 nos.
SCD 4 nos.
TIC37 4 nos.
bandol83 2 nos.
pvphil 2 nos.
vasillis 6 nos.
Carrier Bag Man 4 nos.
jcastellano 2 nos.
baker8 4 nos
demetrios 2 nos.
Francois G 4 nos.
jj506 2 nos.
matejsirk 2 nos.
RKH 2 nos.
sunil 2 nos.
papavienneau 2 nos.
Avellano 2 nos.
JRKO 2 nos.
analogadikt 2 nos.
yoaudio 2 nos.
raymondj 4 nos.
potepuh 2 nos.
e_fortier 2 nos.
skippyboy 2 nos.
rongon 2 nos.
Ray Waters 2 nos.
kosi 2 nos.
rpeter 2 nos.
rothigro 2 nos.
Vunce 4 nos.
Kokanee 4 nos.
mkm 2 nos.
Total: 100 nos.
GB3 List for BHEL34
dtaylo3 4 nos.
invaderzim 2nos.
mike567 2nos.
bert61 2nos.
demetrios 2nos.
sunil 2nos.
Francois G 4nos
jj506 2nos.
TIC37 4nos.
Avellano 2nos.
analogadikt 2 nos.
raymondj 4nos.
Frankgh 2nos.
kosi 2nos.
yoaudio 2nos.
analogadikt 2nos.
Total: 40 nos. ( 40 pcbs ordered)...
The GB is closed for present...
Reserve list (BHEL84)
analogadikt 2nos.
regards
prasi
Bonjour,
Following my answer in this thread : ECL86 PCB board and parts for SE amp needed (post 16 & 18), I received several PM asking for PCB or Gerber Files... Since it seems that there is also some interest for the smallest member of the Baby Huey Family : the ECL86 Baby Huey
As the board measure only 10 x 8 cm, it can be built by PCBWay for 5 $ / 10 pieces
However, unfortunately the excellent ECL86 tube is no more manufactured and vintage NOS tubes are only available at crazy price since they are very hard to find
Hopefully the PCL86 witch use a 300 mA heater (about 13 V) and was used in old TV sets is more readily available at more reasonable price and can also be used with this board
For the reason of the PCB price and the limited availability of the tube (and also because Prasi should be tired to make Group Buy for the Baby Huey Family ) I don't think another GB is needed and if you want I can send the PCB File or even put them on the forum if there is too much demand...
Let me know ?
Au revoir,
Marc
Following my answer in this thread : ECL86 PCB board and parts for SE amp needed (post 16 & 18), I received several PM asking for PCB or Gerber Files... Since it seems that there is also some interest for the smallest member of the Baby Huey Family : the ECL86 Baby Huey
As the board measure only 10 x 8 cm, it can be built by PCBWay for 5 $ / 10 pieces
However, unfortunately the excellent ECL86 tube is no more manufactured and vintage NOS tubes are only available at crazy price since they are very hard to find
Hopefully the PCL86 witch use a 300 mA heater (about 13 V) and was used in old TV sets is more readily available at more reasonable price and can also be used with this board
For the reason of the PCB price and the limited availability of the tube (and also because Prasi should be tired to make Group Buy for the Baby Huey Family
) I don't think another GB is needed and if you want I can send the PCB File or even put them on the forum if there is too much demand...Let me know ?
Au revoir,
Marc