I put together a BOM through Mouser for those interested. I would appreciate another set of eyes on the BOM to make sure I did not miss or duplicate a component.
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=acf772fb91
Enter Access ID: acf772fb91
Thanks,
Patrick
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=acf772fb91
Enter Access ID: acf772fb91
Thanks,
Patrick
If you have a spare PCB, I'll take one.
Thanks
Do
OK, I received 17 boards and this is last list, please check if that is correct.
dadod------------2
platon.rado ----- 1
mlloyd1--------- 2
xrk971-----------1
reaper996--------1
Arthur-----------2
Tonza75-----------2
schillg11---------1
vac231-----------2
zrxshack----------1
erik777-----------1
pinnocchio--------1
Hi. Do you still have the pcb, two channels with shunt regs? I would take one, send me a private email if you do. Thanks
SB
SB
Hi. Do you still have the pcb, two channels with shunt regs? I would take one, send me a private email if you do. Thanks
SB
No, sorry all booked.
This is going to be a very fun build!
Let us know when you require payment
Nice!!
Do
I was thinking to build my board first to be sure that there is no layout errors, but if you want your board I can sent it before I finished mine.
I was thinking to build my board first to be sure that there is no layout errors, but if you want your board I can sent it before I finished mine.
No rush my friend, I'll wait until your board has been tested.
Looks really good btw!
Thanks
Do
- Home
- Amplifiers
- Solid State
- GainWire Mk3 CFA pre/phone amp with very low distortion