Zen Mod. Unfortunately, the time is here for an EOL to my analysis of any schematic in this thread.
Best regards
No need. Some things are best discovered in building. It may turn out you are right, but a real circuit needs to be built to test. I will do so with my second revision, as it will be setup in a manner that is more suitable to do so. When done, Let me knwo what you want to test and I will do so.
buzzforb. I welcome you, Zen Mod and others to use the PM channel to debate opinions, rapport etc. I am lagging way behind you in assembling diyF6 and its relatives. I am anxiously waiting for its kit from your Group Buy.
This thread has helped me hone on the most likely future build to succeed which is a DIDO that rejects the flow of distortion and noise through the loudspeaker.
Best regards
Go to final MLTL thread and help me out. Almost bought wood this weekend, but not sure on few questions. I have realized 40-45 Hz is plenty in my room. Any more and things get difficult with room interaction.
No. Little better for heat, but not much, surprisingly. Connectors are PIA. Bypassed them and direct soldered.
I told ya, it's all because of SMD ;-) I do not trust in parts which I can't hold in my clumsy fingers 🙂
- Status
- Not open for further replies.