• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Moving sale, lots of goodies

Status
Not open for further replies.
Jump to Latest
#21
16) 1 pair of Electro-Voice HP-9040 constant directivity horns. These are for 2" drivers (not included). $140

17) Hammond "organ pull" push/push stereo 6V6 amp. Caps have been replaced with modern poly types. Sounds great! Comes with original tubes $225
 
#23
JoshK said:
So in anticipation of a moving, I've gone through a vast collection of mostly unfinished projects and some chassis. I'll keep updating this thread with stuff as I uncover more.

SOLD) UcD400 4 channel amp unfinished. DIYCable powersupply with Panasonic caps. Four UCD 400 AD8620 modules. XLR inputs, Speakon speaker connectors, Powercon power input, Thermal breaker power switch (in lieu of a fuse). Needs to be wired up with connections between all the stuff. $650

1b) have the case (+ connectors, etc) and toroid remaining... Parmetal black alum anon chassis. Antek AN-7239 toroid (39V/0/39).

2) Behringer CX-2310 analog crossover, stereo 2way or mono 3way. $60

SOLD) CD-Pro2 transport. These were the ones from many years ago that were being sold as a kit. This kit was built by the guy selling the kits (Ken I think). He sold it to me saying the reviewer said that there were a couple issues with it. Having built two of these before, I suspect that the CD sensor wasn't set up quite right. He sold me the built kit along with enough of the boards/parts to rebuild any and every board in it. (no additional transport mechanism or case). Buyer would need to test it out, troubleshoot and possibly rebuilt a board with supplied parts. Has remote. The lid is wrapped up but provided. $400

4) Sansui Solid State 800. possibly dead. I had bought this, it worked but the knobs where very scratchy/intermittant. I opened it up and started to clean out the switches. It worked for a while and then suddenly it won't power on. I suspect the power switch is bad, but its a gamble. Free, but not very motivated to box and ship, so local is better.

5) silver aluminum preamp chassis. comes with extra faceplate. $100

6) black par-metal aluminum chassis. used in my first ever tube preamp project but was noisey as I built it, so I took it apart. the chassis is pretty uglied up but could be made to be very useful for the creative person. $30
Click to expand...
 
#24
Lots more items.... (note many of the previous items are still available).

Antek 7239 big toroid (39v/0/39). Perfect for UCD400s. I pulled the Toroid from the previous amp kit. I believe it was from Antek, the number is not in their standard catalog. Its much bigger than my other 500Va toroids, I'd guess this one was 750VA but I can't confirm that. I currently don't have the details of the purchase. $50 (based on Antek's number system, its safe to say these are >700VA PTXs)

Huge OTL amp power transformers. These are beasts! Prim: 2x 0-115v , Sec: 0-285V @ 2A, 0-115V @ 1A, 0-12V @ 1a, 0-12v @ 1A. I have two of these, perfect for OTL monoblocks. $120 /pr

Edcor CXPP60-MS-6.6K. 60watts, 6.6K primary, screen voltage 40%, 4/8/16ohm secondaries. These are NIB, currently $70/ea on edcor's site, $90/pr.

Fully incased NOS transformers (2) by GE. Primary has multiple voltages (0-55v/80/115/160/230/330/470v) Secondary: two 165/0/-165 (330V). The wattage is not written on them but iirc, they were something like 50ma at that voltage, so these are perfect for preamps. $100/pr
 
Last edited:
#25
Unopened M-Audio Firewire Solo firewire sound card with built in mic amp. I bought this to use for measuring speakers but my laptop died and new laptop doesn't have a firewire port. Also would consider trading for equivalent USB card. $110.
 
#38
Status
Not open for further replies.
Top Bottom