D
Deleted member 550749
How about asking the person who posted the design you show? See if they took a schematic and actual made a working amplifier. Lots more to making an amp than just posting a schematic, like the physical design aspects including chassis etc. The schematic in many cases is the easy part especially if it’s based on a working design but you do not know that just looking at a schematic.
D
Deleted member 550749
Yes i just want to make this amp but with low power , 60-0-60 or 200+watt too high for home listening, thanks for contacting advice, will try to ask , thanks 👍
the schematic says 'blameless' not 'honeybadger'? If it is a blameless (Douglas Self design) they work down to 5V with the standard parts.
D
Deleted member 550749
Yes it's named blameless but designer says in his page it's basically same design as original HB flipped diagram and there is only 2 output pair ,
D
Deleted member 550749
#rsavas. That's gonna work but time consuming, error will b 100% and then correction of error again time consuming, and if I do any mistake then u know what gonna happen with thos parts 🤣🤣 plug and play solution is just assemble and use 😉
where is 'his page'? Can you point us at it? I do feel that there might be a better option unless you have some pressing need to use this circuit?
D
Deleted member 550749
D
Deleted member 550749
He inspired by this topology and made this practically same build with little changes , by the way thanks , leave this conversation for now , 🙏
Okay, looks like a working and tested amp, I did not translate the text, might be a good idea to simulate it, something else to learn maybe.
Looks like he took ideas from Doug Self, OS, Bob Cordell, etc, options for TMC compenstation , no capacitor values 🙂 incomplete documentation, too bad, ask the author to share ?
Good Luck
Looks like he took ideas from Doug Self, OS, Bob Cordell, etc, options for TMC compenstation , no capacitor values 🙂 incomplete documentation, too bad, ask the author to share ?
Good Luck
D
Deleted member 550749
D