Floor-to-Woofer Coupling for Large Three-Way

[Dave Bullet]

If you are a vituix cad user, you can use the floor reflection in the baffle diffraction sim. Here's a bookshelf speaker without floor bounce:

Here's the same bookshelf 400mm off the floor (note green line):

I'm a bit new to this in VituixCAD so I might have it all wrong 🙂

 

[camplo]

Better to keep a woofer at mid height, between floor and ceiling, anyway

A woofer at mid height? Whats the reasoning?

It follows that a 18 " Is too big, as the big cone produces much reflections of this kind, the result Is blurry

In my own experience having an 18" on the floor works good... where should I look for the blurry?