aha , now you clarified ........ you want to use just EQ network (shown as R0,L0,R1,C1,L1 in simulation model)
partially mea culpa , though just now I finished first morning coffee , so not entirely to blame me
yeah , you got it right , there is practical info , but if you want to change box vs. what's given in recipe table on p.7 , you'll need to fire up measuring jig
partially mea culpa , though just now I finished first morning coffee , so not entirely to blame me
yeah , you got it right , there is practical info , but if you want to change box vs. what's given in recipe table on p.7 , you'll need to fire up measuring jig
I had assumed they were more. Nice.
No problem, just keep asking questions. This forum, it's people, digital pics are better than a kit.
Russellc
common PSU or mono PSU?
Pa is using 8x15mF (CRC arrangement) for common one , and nothing stops you in using more
Common Psu. I don't think I have room for mono. Thanks.
Everything you need to know about the power supply.
diyAudio Power Supply Circuit Board v3 illustrated build guide
Is the universal power supply compatible with teabag's M2 boards?
Is the universal power supply compatible with teabag's M2 boards?
Yes that is what I'm using. Here is what I'm using for reference to build mine:
First Watt Clone - The DIY M2 - Solid State - The Klipsch Audio Community
Last edited:
Thanks, I can't find the parts number for the two bridge rectifiers between the tranny and the boards.. I get that than I think I'm Gucci.
Study the build guides for First Watt amps put together by 6L6. You will learn all sorts of tips from them. They all have the same basic power supply, so all the amp guides are useful there. Also for how things go together, wiring, parts choices etc. The only thing that is a complete kit are the Amp Camp kits.
Fear not, not that hard really.
Russellc
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Pass Labs
- First watt choices