See the thread "Balanced F5 in a Small Footprint" which has a provision for turbo diodes, but only one output FET per rail.
http://www.diyaudio.com/forums/pass-labs/213152-balanced-f5-small-footprint-3.html#post3037810
http://www.diyaudio.com/forums/pass-labs/213152-balanced-f5-small-footprint-3.html#post3037810
I am.
But I'm using perf board - which I prefer to laid out PCB's.
I took one of the front end boards to BA 2012 (I'm building mono blocks) and got into a number of interesting conversations with other builders. I even had a chance to ask Mr P about some value changes I'm making.
Here is a photo taken by AR2.
http://www.diyaudio.com/forums/club...festival-audio-happening-251.html#post3219985
A low power test bed version is going to be lit up this week end - hopefully with good results.
Graeme
This weekend will see the mounting of the boards to the new setup as well as building up of PSU needed. Case will be next.
With the risk of being blasted for not reading all 187 pages, Are there PCB's for the actual F5TV3 yet?
Or is that what a.wayne has been asking?
Or is that what a.wayne has been asking?
Only V3 boards available right now are TeaBags. Wayne is helping me stay on track showing an example of Teas boards in a monoblock.
Supposedly, yes. My understanding was that the boards would be arriving soon. It is probably just a matter of logistics.
toecutter left this planet, and got a nice place on the dark side of the moon it seams😀
but the boards are done. we are waiting for them in the store now🙂
Cool! If I understand correctly the ones toecutter made were convertable boards? ie you can add as many mosfet pairs as you want? and the first gainstage is on a separate board right? At least that is what it looks like to me.
Why did you cut the boards , the sad part is , when toe asked me to accept boards for testing , i passed on them , feeling i would not have had the time to do them right away ...
Little did i know ...... 🙁
Little did i know ...... 🙁
- Status
- Not open for further replies.