Here is a picture with the midbass system with 6 pcs of 10" Infinity polyprop bullet woofer in dipol baffels on each side. I want to complete the system with dipole woofers for the lower end as vel. I now use the 8 10" back there in closed boxes. Crossovers are set in DBX driverack PA. Mid bas is cut around 50hz going up to around 250hz to meet the Emims.
It sounds wery good
It sounds wery good
Attachments
Curious, which cable you like better, the 750 or M1, I prefer the M1
I think i prefer the M1, it sound bigger and smoother M1 is on them Emim tower and 750 for the midbass towers.
Personally I'd leave them alone, heat will shrink the mylar, BUT will leave wrinkles in the ribbon
I tried on a broken one an experienced what you describe.
They sound very good so mybie i should leva them alone
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Planars & Exotics
- Emim tower baffle.