Hi Guys,
I have two Elna Cerafine 500 Volt 220uf+220uF Capacitors available, unused with clamps, £80 (80 GBP) buys both, don't ask what they cost new when you COULD get them, I really dont remember!
Mozfet
I have two Elna Cerafine 500 Volt 220uf+220uF Capacitors available, unused with clamps, £80 (80 GBP) buys both, don't ask what they cost new when you COULD get them, I really dont remember!
Mozfet
Explain??
Hi TBLA,
I understand the Elnas are no longer Manufactured, is this not the case?
Mozfet
Hi TBLA,
I understand the Elnas are no longer Manufactured, is this not the case?
Mozfet
Cerafines
I know where there's a significant number of 10,000uF, 63V Cerafines available for only 12ukp each 😉
A.
I know where there's a significant number of 10,000uF, 63V Cerafines available for only 12ukp each 😉
A.
What's it worth 😉
I'll regret this - cutting off my own supply, but being a generous philanthropist, take a sneeky peek here: -
http://www.earthcurrents.com/london-live/cerafine.htm
I've bought a number of them, the seller is a genuine honest guy, tell him Andy W sent you there !
Andy.
I'll regret this - cutting off my own supply, but being a generous philanthropist, take a sneeky peek here: -
http://www.earthcurrents.com/london-live/cerafine.htm
I've bought a number of them, the seller is a genuine honest guy, tell him Andy W sent you there !
Andy.
Nice one Andy!
Nice one Andy!
To be honest, I'm not a big fan of Cerafines for use in Solid State Amps, they do sound smooth though and will improve a lot of Amps, I used to install them in Arcams and Robertson 4010s to good effect, but with certain amps they just dont have it. (in my opinion of course!) Cue Flame from CeraFan!
Mozfet
Nice one Andy!
To be honest, I'm not a big fan of Cerafines for use in Solid State Amps, they do sound smooth though and will improve a lot of Amps, I used to install them in Arcams and Robertson 4010s to good effect, but with certain amps they just dont have it. (in my opinion of course!) Cue Flame from CeraFan!
Mozfet
80 GBP for Both of Course!
Hi Nick,
yes I can ship to Malaysia, postage would be paid by yourself at cost, should not be too much and I can get you a price Monday. The price of 80 GBP is for Both Capacitors, I like to think the prices for all the items I'm currently selling is reasonable and fair. Payment, well could you obtain an International Money Order in GBP, or a Bank Draft in GBP drawn on a UK Bank, these can be obtained from certain Travel Agents if your Bank cannot help. you can e-mail me at: goodstuff57_NO_SPAM@hotmail.com (removing the _NO_SPAM of course!)
Mozfet
Hi Nick,
yes I can ship to Malaysia, postage would be paid by yourself at cost, should not be too much and I can get you a price Monday. The price of 80 GBP is for Both Capacitors, I like to think the prices for all the items I'm currently selling is reasonable and fair. Payment, well could you obtain an International Money Order in GBP, or a Bank Draft in GBP drawn on a UK Bank, these can be obtained from certain Travel Agents if your Bank cannot help. you can e-mail me at: goodstuff57_NO_SPAM@hotmail.com (removing the _NO_SPAM of course!)
Mozfet
could you get a the mail qoute please
also i have done tt from my bank to a bank in england before
can i do that also. TT is faster and safe then sending the money over
also i have done tt from my bank to a bank in england before
can i do that also. TT is faster and safe then sending the money over
hey this caps are normally for ps section rite? can i used it for bypassing stages or must i use them in ps only
what's the pro and cons for using a 220uf+220uf
what's the pro and cons for using a 220uf+220uf
Electrolytic Voltage
I believe as long as you have an Electrolytic Biased at at least 30% of the max voltage ie 150V in this case they should be fine, at less than (I think its 25%) of the max voltage they cease to operate correctly.
Nick can you contact me via e-mail, I'll get a price today but I would prefer to discuss further details (ie my Bank details) via e-mail.
Mozfet
I believe as long as you have an Electrolytic Biased at at least 30% of the max voltage ie 150V in this case they should be fine, at less than (I think its 25%) of the max voltage they cease to operate correctly.
Nick can you contact me via e-mail, I'll get a price today but I would prefer to discuss further details (ie my Bank details) via e-mail.
Mozfet
Postage Costs
Hi Nick, postage to Malaysia is 9.5 GBP this is just standard postal service without insurance.
Mozfet
Hi Nick, postage to Malaysia is 9.5 GBP this is just standard postal service without insurance.
Mozfet
dear mozfet
sorry i couldn't reply your mail, last nite was at the police station reporting a car accident.
Due to car accident, my budget has now been shifted to repairing the damage to the car.
i know you when thru the hassle of finding the price for me
i am gratefully though.
sorry i couldn't reply your mail, last nite was at the police station reporting a car accident.
Due to car accident, my budget has now been shifted to repairing the damage to the car.
i know you when thru the hassle of finding the price for me
i am gratefully though.
- Status
- Not open for further replies.