Streamer DAC assembled by me with the following components:
Box - Naim (I believe NNT radio server)
Streamer - Raspberry PI 3B, IsolatorPI, ReceiverPi from IanCanada and Kalli (not mounted at the moment).
DAC - Soekris dam 1021 r2r dac
Power Supplies - Pi section, fan and lighting - powered by the original Naim power supply; DAC, isolator and receiver section powered by 3 Halls SSLV1.3 UltraBiB shunt regulator.
For any technical clarifications on the assembly... just ask 🙂
Asking € 700,00
Box - Naim (I believe NNT radio server)
Streamer - Raspberry PI 3B, IsolatorPI, ReceiverPi from IanCanada and Kalli (not mounted at the moment).
DAC - Soekris dam 1021 r2r dac
Power Supplies - Pi section, fan and lighting - powered by the original Naim power supply; DAC, isolator and receiver section powered by 3 Halls SSLV1.3 UltraBiB shunt regulator.
For any technical clarifications on the assembly... just ask 🙂
Asking € 700,00
Attachments
Hi, is this still available without the Kali and if so, what would be the asking price?
Cheers
John
Cheers
John
I'm new to the forum. As it, is the streamer/ Soekris dam 1021 r2r dac and the power supply as shown fully functional as streaming/DAc?
I'm. very interested and wanting to buy your streamer/dac. Just few more questions. What's the operating voltage, I'm. located in USA and typically we operate at 115. What would it take to covert the power supply to operate at 115 volts. My audio room is wired for Ethernet cable, can the streamer operate with Wifi? Attached is photo of my system. I have a Sony SCD777es as CD source and a modified Lenco turntable.
Attachments
Correction, my audio room is not wired with ethernet cable and very difficult to get a ethernet cable from my internet router to my audio room
Both toroidal assemblies are connected to 230v (two primary are 115v) but it is possible and easy to change to 115v (minimum DIY knowledge 🙂) see the photo.
The streamer section is currently powered by a Raspberry PI 3B via network cable (more stable) but "mounting" a WI-FI dongle is possible.
The streamer section is currently powered by a Raspberry PI 3B via network cable (more stable) but "mounting" a WI-FI dongle is possible.
https://thepihut.com/products/raspberry-pi-dual-band-5ghz-2-4ghz-usb-wifi-adapter-with-antenna
the wi-fi raspberry dongle
the wi-fi raspberry dongle