• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

For Sale DIY Streamer + Soekris 1021 DAC

Things you have for sale.
Streamer DAC assembled by me with the following components:
Box - Naim (I believe NNT radio server)
Streamer - Raspberry PI 3B, IsolatorPI, ReceiverPi from IanCanada and Kalli (not mounted at the moment).
DAC - Soekris dam 1021 r2r dac
Power Supplies - Pi section, fan and lighting - powered by the original Naim power supply; DAC, isolator and receiver section powered by 3 Halls SSLV1.3 UltraBiB shunt regulator.
For any technical clarifications on the assembly... just ask 🙂

Asking € 700,00

IMG20241012105942.jpg

IMG20241012105718.jpg
IMG20241012105951.jpg

IMG20241012105956.jpg
IMG20241012110012.jpg
IMG20241012105948.jpg
IMG20241019114805.jpg
 

Attachments

  • IMG20241019114828.jpg
    IMG20241019114828.jpg
    260.3 KB · Views: 115
  • IMG20241012105951.jpg
    IMG20241012105951.jpg
    307.2 KB · Views: 138
  • IMG20241012105956.jpg
    IMG20241012105956.jpg
    447 KB · Views: 96
  • IMG20241012110012.jpg
    IMG20241012110012.jpg
    304.6 KB · Views: 102
  • IMG20241012105948.jpg
    IMG20241012105948.jpg
    329.9 KB · Views: 107
  • Like
Reactions: Mrdrewk
I'm. very interested and wanting to buy your streamer/dac. Just few more questions. What's the operating voltage, I'm. located in USA and typically we operate at 115. What would it take to covert the power supply to operate at 115 volts. My audio room is wired for Ethernet cable, can the streamer operate with Wifi? Attached is photo of my system. I have a Sony SCD777es as CD source and a modified Lenco turntable.
 

Attachments

  • F0AFE898-FBB9-4A48-BE56-1CEEAD8A15D5.jpeg
    F0AFE898-FBB9-4A48-BE56-1CEEAD8A15D5.jpeg
    446.4 KB · Views: 18
Both toroidal assemblies are connected to 230v (two primary are 115v) but it is possible and easy to change to 115v (minimum DIY knowledge 🙂) see the photo.
The streamer section is currently powered by a Raspberry PI 3B via network cable (more stable) but "mounting" a WI-FI dongle is possible.

1749246511311.png