As a newby to diy speakers where does one start with the tons of info around on building speakers. If it assists I am going to be keen on av and music and does this mean a four/five/seven speaker set up.
Thanks in advance
Smokeyonediy speakers
Thanks in advance
Smokeyonediy speakers
Smokeyone said:where does one start
I'd start here -- at Bob Stout's Loudspeaker Driver Selection Guide. A lot of information covering lots of stuff laid out in an easy to digest manner.
dave
Re: Re: diy speakers
Is selecting drivers a good place to begin a DIY? I have read some amount of info on speaker building and not particularly clear on this one. Do people start by selecting the best driver they can afford and go from there to designing the xover etc?
I hope this is not a dumb question.
thanks
prash
planet10 said:
I'd start here -- at Bob Stout's Loudspeaker Driver Selection Guide. A lot of information covering lots of stuff laid out in an easy to digest manner.
dave
Is selecting drivers a good place to begin a DIY? I have read some amount of info on speaker building and not particularly clear on this one. Do people start by selecting the best driver they can afford and go from there to designing the xover etc?
I hope this is not a dumb question.
thanks
prash
Re: Re: Re: diy speakers
Bob's site has a lot more in it than driver selection. When doing a DIy speaker the 1st thing you do is figure out what your design goals are -- then you start looking for sets of drivers that will accomplish this (keeping XO in mind), then you can select drivers, build the box & then the XO.
dave
prash said:Is selecting drivers a good place to begin a DIY? I have read some amount of info on speaker building and not particularly clear on this one. Do people start by selecting the best driver they can afford and go from there to designing the xover etc?
Bob's site has a lot more in it than driver selection. When doing a DIy speaker the 1st thing you do is figure out what your design goals are -- then you start looking for sets of drivers that will accomplish this (keeping XO in mind), then you can select drivers, build the box & then the XO.
dave
- Status
- Not open for further replies.