Foot pedal control
I've missed this for a long time, but now it's added: channel's output control using "third" hand or foot pedal, when nobody is around for assistance, etc. 🙂
Foot pedal control video
I've missed this for a long time, but now it's added: channel's output control using "third" hand or foot pedal, when nobody is around for assistance, etc. 🙂
Foot pedal control video
Firmware v1.1 is released
Dear all, the firmware v1.1 is now released. But, this time it does not comes alone but accompanied with first milestone of EEZ studio. A first introduction how to use one of its modules is now available in separate thread here. More specific information how to use it to access EEZ H24005 I'll continue to post in this thread.
Two main feature of v1.1 are added file management for built-in SD card and internal data logger. In this version both of them are accessible only using SCPI commands, but don't worry a decent support to automate interaction with SD card and data logger is included in mentioned EEZ Studio.
Dear all, the firmware v1.1 is now released. But, this time it does not comes alone but accompanied with first milestone of EEZ studio. A first introduction how to use one of its modules is now available in separate thread here. More specific information how to use it to access EEZ H24005 I'll continue to post in this thread.
Two main feature of v1.1 are added file management for built-in SD card and internal data logger. In this version both of them are accessible only using SCPI commands, but don't worry a decent support to automate interaction with SD card and data logger is included in mentioned EEZ Studio.
New video about firmware v1.1 main features
Preview of two main features added to firmware v1.1: SD card file management and internal data logging using SCPI commands. The EEZ Studio version M1 (its ESW module) is used for interaction with the EEZ H24005 (i.e. initiate data logging and exchange files).
YouTube
Preview of two main features added to firmware v1.1: SD card file management and internal data logging using SCPI commands. The EEZ Studio version M1 (its ESW module) is used for interaction with the EEZ H24005 (i.e. initiate data logging and exchange files).
YouTube
Hi. Can I use the latest firmware v1.1 with the first version pcb? Or isn't worth the upgrade?
Thanks
SB
Thanks
SB
Hello, I was looking at the crowdsupply site but could not figure out if this power supply is available for purchase. When will it be?
Stephen
Stephen
The latest update regarding H24005 status on the CrowdSupply.
An externally hosted image should be here but it was not working when we last tested it.
EEZ Bench Box 3 crowdfunding started
The EEZ BB3 crowdfunding campaign is now live: https://www.crowdsupply.com/envox/eez-bb3
The EEZ BB3 crowdfunding campaign is now live: https://www.crowdsupply.com/envox/eez-bb3
I'm super excited for the Bench Box 3. I narrowly missed out on the EEZ H24005 a few years back, but the improvements and additional capabilities of the BB3 have made it worth the wait.
The MicroPython scripting allowing it to function as a curve tracer will definitely come in handy for audio-related use: YouTube
There's ~7 hours remaining on the Crowd Supply campaign for those interested: EEZ Bench Box 3 | Crowd Supply
Congrats prasimix on running a successful campaign!
The MicroPython scripting allowing it to function as a curve tracer will definitely come in handy for audio-related use: YouTube
There's ~7 hours remaining on the Crowd Supply campaign for those interested: EEZ Bench Box 3 | Crowd Supply
Congrats prasimix on running a successful campaign!
Last edited:
Thanks for support
Thanks, I believe that with BB3 we'll have more room to grow in many ways.
Less then two hours remains to get one of the pledge levels with discounted prices.
Many thanks for everyone who are following our progress on both H24005 and BB3 projects and support us.
Thanks, I believe that with BB3 we'll have more room to grow in many ways.
Less then two hours remains to get one of the pledge levels with discounted prices.
Many thanks for everyone who are following our progress on both H24005 and BB3 projects and support us.