DIY CD drive based on a computer CDROM

[Jempie]

Dear Lucifix,

I have an Rockna dvd-rom controller
can a use your Luckit IDE hexcode to control the this board?

Regards,

 

[pradit_p]

Change..

Go there for source code. with remote you need to know your remote ID code before use Remote Function.

http://www.diyaudio.com/forums/show...30529&perpage=25&highlight=cdrom&pagenumber=4

No time for Kit.

Regards.

Pradit

 

[Jempie]

Dear Lucifix or any one else,

I like to use this with the modi (ROCKNA controller card)

- all remote functions (also open and close button)
- standby
- see on the display the title and the artist

if have try both and 16F877A and 18F452 18F452 is mutch
better thanks to Lucifix

We need for school to change the text in to Holland
could you send me the source for both chips

Thanks in advance

 

[rene5150]

I have build the controller with the 89C51 posted by Roly3055
and also the accompaning programmer. the problem is that i don't know which software to use to put the .HEX file into the controller.

Can somebody help me? please.

An externally hosted image should be here but it was not working when we last tested it.

 

[pigoia]

Diy cd

This is my new diy cd player
Cdrom controller by lucifix
Dac is my project, cs8416 tda1443

An externally hosted image should be here but it was not working when we last tested it.

[/URL]

An externally hosted image should be here but it was not working when we last tested it.

[/IMG]

An externally hosted image should be here but it was not working when we last tested it.

[/URL]

An externally hosted image should be here but it was not working when we last tested it.

[/IMG]

 

[rene5150]

Yes, I got it working. The 89C51 is programmed by a friend of mine knows a lot more than i do about it.

But i think i'm gonna also build the Luckit controller, because this one can't do FFWD and REW. and when i push NEXT button two times, the controller crashes

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

@Pigioa, nice box you got there. Have you got a picture of the controller?

 

[pigoia]

An externally hosted image should be here but it was not working when we last tested it.

[/URL]

An externally hosted image should be here but it was not working when we last tested it.

[/IMG]

 

[afhifi]

This is my Power CD Player

An externally hosted image should be here but it was not working when we last tested it.

 

[afhifi]

Message for " Pigoia" :
ho visto che sei di Bologna, io di Ferrara, perche non parlarci in Italiano ?
Comunque questo è il lavoro che ho appena terminato,
se vuoi puoi contattarmi anche tramite email che trovi su: www.afhifi.altervista.org
Per scambio consigli ed opinioni.
Il DAC cho ho utilizzato è il Cirrus CS4344 24bit 192Khz con 105db di dinamica, devo dire suona molto bene.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

 

[Cal Weldon]

This is an English speaking forum. If you wish to post in another language, please also include the English translation.

Thank you.

 

[MCLL]

rene5150

Nice job.

 

[Gigillo]

Very Goog work!!!

 

[ninshoo]

Hi,

where can I buy a remot control as that below please (in blue of preference)

Thank you😉

 

[L700]

i wanna ask is this controller can slow down the CD-ROM speed .. ???i think CD-Player reading speed are just 4x if i not mistaken

 

[ninshoo]

Hi,
I have small one worries, I have a cd rom ASUS. I have an exit digital output and I shall want to transform it into optic output. I therefore took a Toshiba Toslink TOTX177 (http: // pdf.eicom.ru / datasheets / toshiba_pdfs / totx177 (fr, t) / totx177 (fr, t) .pdf)
I fed it, the connector cable has to light the red (on it a beam by opening the hatch of protect dust) but has do not have sound.

Thank you🙁

 

[afhifi]

Would I like Plextor to use a drive px 130a as you/he/she has made SERGE LISSES, does someone know me to say that controller to use and the relative HEX?
Thanks.

 

[glt]

I2S out, is this the lowest jitter I can get?

I was able to find and tap into the 3 I2S signals from the controller chip of my CDROM and feeding it to a TwistedPearAudio DAC. Is this the best jitter performance I can get? What else can I do?

 

[Sergelisses]

http://eshop.diyclub.biz/product_info.php?products_id=436

This controller works perfectly with the PLEXTOR 130A

Serge

 

[afhifi]

Thanks for the answer, I have found the defect in the feeder of the CDrom.
Now filtrates better the 5V also the Plextor px 130A function well with the controller
from me built.
For GLT this is the DAC that I use with the drive cdrom.

Hi.

 

[Sergelisses]

On the Plextor 130A ,i have also changed the Oscillator with a Tentlabs .
The new oscillator have a dedicated 5v .

Serge