I love it when people take the time to document what they are doing and the progress they are making!! every pictures helps inspire!
Thanks guys. That's why I'm documenting all my efforts on Audio Tweak | Humble home of newbie tweaker
Video with some progress DIY Power amplifier - intelligent soft start first testing in (12V trigger) master/slave mode - YouTube
intelligent soft start first testing in (12V trigger) master/slave mode.
intelligent soft start first testing in (12V trigger) master/slave mode.
Loads of drilling and milling in the spare room....
Heatsink and angled profile coming together surprisingly easy. Not so lame after all 🙂
A bit of tapping
and standoffs
drilled hole for transformer to module wiring
making transformer and softstart template CustomWorks SoftStarty
And then drilling and more tapping afterwards
Heatsink and angled profile coming together surprisingly easy. Not so lame after all 🙂
An externally hosted image should be here but it was not working when we last tested it.
A bit of tapping
An externally hosted image should be here but it was not working when we last tested it.
and standoffs
An externally hosted image should be here but it was not working when we last tested it.
drilled hole for transformer to module wiring
An externally hosted image should be here but it was not working when we last tested it.
making transformer and softstart template CustomWorks SoftStarty
An externally hosted image should be here but it was not working when we last tested it.
And then drilling and more tapping afterwards
An externally hosted image should be here but it was not working when we last tested it.
I got crazy idea to polish all aluminium parts inside. Never ever / waste of time. 400 and 800 grid sanding paper used, then drill polishing kit.
Pictures from this funny adventure:
After rough polishing testing of mechanical parts. All coming up slowly, but surely.
Pictures from this funny adventure:
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
After rough polishing testing of mechanical parts. All coming up slowly, but surely.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Now it's starting to be more fancy proper polishing on it's way.
I bought nice polishing kit from eBay. 3 stage polishing in drill.
Application of thermal paste. Again cheap tube from eBay.
And now screwed and ready. Shiny things me like!
Sorry again for this shameful advert, but this feet are absolutely amazing http://www.customworks.cz/komponenty...ojove-nozicky/ Check 'em out!
Softstarts from CustomWorks SoftStarty functions: remote trigger and thermostat protection with 600 VA transformers
And finally also polished top tray.
I bought nice polishing kit from eBay. 3 stage polishing in drill.
An externally hosted image should be here but it was not working when we last tested it.
Application of thermal paste. Again cheap tube from eBay.
An externally hosted image should be here but it was not working when we last tested it.
And now screwed and ready. Shiny things me like!
An externally hosted image should be here but it was not working when we last tested it.
Sorry again for this shameful advert, but this feet are absolutely amazing http://www.customworks.cz/komponenty...ojove-nozicky/ Check 'em out!
An externally hosted image should be here but it was not working when we last tested it.
Softstarts from CustomWorks SoftStarty functions: remote trigger and thermostat protection with 600 VA transformers
An externally hosted image should be here but it was not working when we last tested it.
And finally also polished top tray.
An externally hosted image should be here but it was not working when we last tested it.
Just 1 suggestion about thermal paste, don't make round shapes from it. Air gets stuck between the 2 plates.
You can do that around the screw holes, but not elsewhere.
You can do that around the screw holes, but not elsewhere.
An externally hosted image should be here but it was not working when we last tested it.
What is the point to not simply build this amp ?
An externally hosted image should be here but it was not working when we last tested it.
Because those modules were ****, I have these modules in:
http://www.customworks.cz/wp-content/gallery/cache/123_watermark_640x480_hypa170_1024.jpg
http://www.customworks.cz/wp-content/gallery/cache/123_watermark_640x480_hypa170_1024.jpg
An externally hosted image should be here but it was not working when we last tested it.
Gee Martin
I am very surprised you have made such a comment?
While you are free to say what you please, it is not the impression I got from you when you had these modules installed.
Just out of interest what problem did you have with them?
Cheers
Anthony
That really .really. nice work on may counts.
Thanks bunches for sharing!
Awesome man.
*like the banks of Fine Golds... a lot.
Thanks bunches for sharing!
Awesome man.
*like the banks of Fine Golds... a lot.
http://www.customworks.cz/amplifiers/hypa170/
An externally hosted image should be here but it was not working when we last tested it.
Last edited:
- Status
- Not open for further replies.