• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Discrete Low Jitter Clock GB

Status
Not open for further replies.
Jump to Latest
#165
@h-wan: Alter resistor R205 to lower the supply voltage to the comparator. The AD8561 doesn't swing to its positive rail, so you probably don't want to reduce it to 3.3V. Try 1.8kR or 2.2kR and see what the output level is like. I can't make any guarantees, I didn't characterise the clock for that situation. For you reference, here's what the levels are like with a 5V supply to the comparator (as standard):
 

Attachments

  • LJC B4 Trace 16.9344MHz.jpeg
    LJC B4 Trace 16.9344MHz.jpeg
    303.5 KB · Views: 380
#166
It's now the end of the month, and I'm closing the group buy. I'm still waiting on the PCBs, they have just shipped and should be here in a week.

I'm intending on doing things in the same way I did them last time. I'll start taking payments now. Those who have ordered only PCBs will have their order shipped as soon as I get their payment and the PCBs, those who have ordered kits will have their order shipped as soon as I get their payment and the PCBs and the components. I'll order the components this week.

Please make PayPal payments to the address shown in the picture (I'm trying to avoid spambots). Please make sure your payment has the address you'd like you PCBs/kits shipped to attached, and include you DIYAudio.com username in the comments. Here is the total cost for each participant:

- tagheuer, excluding shipping: USD66, total: USD75.55
- badrisuper, excluding shipping: USD46, total: USD57.62
- s3tup, excluding shipping: USD60, total: USD70.79
- zjaakco, excluding shipping: USD43, total: USD54.41
- WALTER BURKHARD, excluding shipping: USD36, total: USD46.79
- mravinsky, excluding shipping: USD66, total: USD76.79
- unixdeveloper, excluding shipping: USD9, total: USD18.55
- h-wan, excluding shipping: USD9, total: USD19.79
- Aleks1, excluding shipping: USD36, total: USD46.79
- Mikewong, excluding shipping: USD15, total: USD24.55
- korben69, excluding shipping: USD9, total: USD19.79
- ymwong, excluding shipping: USD66, total: USD75.55
- lil' kinght, excluding shipping: USD6, total: USD15.55
- jameshillj, excluding shipping: USD30, total: USD35.64
- chungtat, excluding shipping: USD12, total: USD21.55
- skylab, excluding shipping: USD43, total: USD53.04
- goldkenn, excluding shipping: USD83, total: USD95.04

The shipping above is just basic airmail, and I'm sending them at your risk. I'm more than happy to send them by a tracked service, please PM me if that's what you'd prefer. I'd recommend doing that if you're country has an unreliable postal service.

If I've left your name off, or you think I've got your order wrong, please PM me.

Thanks,
Anton
 

Attachments

  • email.jpg
    email.jpg
    18.4 KB · Views: 352
#169
Thanks for the payments so far, here's where we're at:

- tagheuer: paid, address supplied
- badrisuper: waiting for payment
- s3tup: paid, address supplied
- zjaakco: paid, address supplied
- WALTER BURKHARD: waiting for payment
- mravinsky: waiting for payment
- unixdeveloper: waiting for payment
- h-wan: paid, address supplied
- Aleks1: waiting for payment
- Mikewong: waiting for payment
- korben69: waiting for payment
- ymwong: waiting for payment
- lil' kinght: waiting for payment
- jameshillj: waiting for payment
- chungtat: waiting for payment
- skylab: paid, address supplied
- goldkenn: waiting for payment

There is also a bit of a problem. I've found that the supplied who I got the crystals from for the last groupbuy has now stopped selling them. I can still get name brand 11.2896MHz crystals, but it looks like I'm going to have to supply generic 16.9344MHz and 33.8688MHz crystals.
 
#171
Another update:

- tagheuer: paid, address supplied
- badrisuper: waiting for payment
- s3tup: paid, address supplied
- zjaakco: paid, address supplied
- WALTER BURKHARD: paid, address supplied
- mravinsky: waiting for payment
- unixdeveloper: paid, address supplied
- h-wan: paid, address supplied
- Aleks1: waiting for payment
- Mikewong: waiting for payment
- korben69: waiting for payment
- ymwong: waiting for payment
- lil' kinght: waiting for payment
- jameshillj: paid, address supplied
- chungtat: waiting for payment
- skylab: paid, address supplied
- goldkenn: waiting for payment

The parts for the kits have started to arrive.
 
#177
An update on where we are at:

- tagheuer: paid, address supplied
- badrisuper: waiting for payment
- s3tup: paid, address supplied
- zjaakco: paid, address supplied
- WALTER BURKHARD: packed
- mravinsky: paid, address supplied
- unixdeveloper: packed
- h-wan: packed
- Aleks1: waiting for payment
- Mikewong: waiting for payment
- korben69: waiting for payment
- ymwong: waiting for payment
- lil' kinght: waiting for payment
- jameshillj: paid, address supplied
- chungtat: paid, address supplied
- skylab: paid, address supplied
- goldkenn: waiting for payment

I'm still waiting on the PCBs to arrive, they should be here next week.
 
#179
The PCBs arrived in New Zealand on Friday, but didn't reach me. I should have them tomorrow.

@mstr: Unfortunately you have missed the groupbuy. However, there will be PCBs leftover, and possible some DC kits. I'll contact you after the groupbuy and let you know if there are any kits left.
 
Status
Not open for further replies.
Top Bottom