Hi Tea-bag!
Thank you for the great kits. I have already built one board from the kit going to start testing shortly. And almost done the second one. Although I have a question on the matched fets
From left to right on the pictures.
Power fets first two pictures and last two are matched.
The question is which value should I be looking at as matched tge x,xx I. E 8.63 or yyy ie 210. In the first set both of them were pretty close but here it is slightly different
Thanks,
Oleg
Sent from my ONE A2003 using Tapatalk
Thank you for the great kits. I have already built one board from the kit going to start testing shortly. And almost done the second one. Although I have a question on the matched fets
From left to right on the pictures.
Power fets first two pictures and last two are matched.
The question is which value should I be looking at as matched tge x,xx I. E 8.63 or yyy ie 210. In the first set both of them were pretty close but here it is slightly different
Thanks,
Oleg
Sent from my ONE A2003 using Tapatalk
Hello, good morning tea bag,
I took two kits that should arrive within days.
Tell me please what is the list of components to be added?
In some bom I read 12-0-12 transformer in other 12x2 ...
What value potentiometer suggest? in a bom recommends 15 to 25k; what value you used? I thought I read that the best one is 10?
Thank you all for your kind answers
I took two kits that should arrive within days.
Tell me please what is the list of components to be added?
In some bom I read 12-0-12 transformer in other 12x2 ...
What value potentiometer suggest? in a bom recommends 15 to 25k; what value you used? I thought I read that the best one is 10?
Thank you all for your kind answers
How do I order? PM me the PayPal account?
Sent from my SM-N9005 using Tapatalk
Invoice sent. Thanks.
Quick 2 question:
1-can I add a selector switch (ex 2P4T) for multiple inputs?
2- can I have 2 outputs for bi-amping? Connect in parallel?
Sorry, I know there is a search function, but am in a road trip in remote area and very poor Internet connection
Sent from my SM-N9005 using Tapatalk
1-can I add a selector switch (ex 2P4T) for multiple inputs?
2- can I have 2 outputs for bi-amping? Connect in parallel?
Sorry, I know there is a search function, but am in a road trip in remote area and very poor Internet connection
Sent from my SM-N9005 using Tapatalk
Quick 2 question:
1-can I add a selector switch (ex 2P4T) for multiple inputs?
2- can I have 2 outputs for bi-amping? Connect in parallel?
Sorry, I know there is a search function, but am in a road trip in remote area and very poor Internet connection
Sent from my SM-N9005 using Tapatalk
1-Yes you can, and we are releasing an input board soon for this. If you would like to use one of the test boards, I can arrange that.
Any such input simply comes before the input portion of the board, not the output.
2-Yes, I do this, and have 100R resistors between them, It is discussed in my blog.
Thank you!Invoice sent. Thanks.
Sent from my SM-N9005 using Tapatalk
1. Yes, please for the test input board.1-Yes you can, and we are releasing an input board soon for this. If you would like to use one of the test boards, I can arrange that.
Any such input simply comes before the input portion of the board, not the output.
2-Yes, I do this, and have 100R resistors between them, It is discussed in my blog.
2.Will review your blog when I have better access
I´m interested in 4 full kits with pcb. Could you please pm me with kit details, pricing and , payment info including shipment to Madrid, Spain?
Thanks a lot and kind regards
Jaime
Yes I will. Sorry for the delay. The kits are back in stock and shipping!!!
Some of you may be interested in integrating this with your build!
http://www.diyaudio.com/forums/grou...nput-selector-volume-control.html#post4716031
http://www.diyaudio.com/forums/grou...nput-selector-volume-control.html#post4716031
Thanks Salas!
As printed on the silkscreen. 1R in Hypnotize (i.e. the single input beefed up version) 10R in Mezmerize (i.e. the six inputs version)