All that onto a single sided PCB and only three links.
And well done in getting the NFB to feedback the actual output.
And well done in getting the NFB to feedback the actual output.
Last edited:
Thanks Andrew, yes still learning here on diya and a long way to go yet!!
regards
Prasi
Thanks Mr. Miles,
I really like this design as it is very flexible. I will make some PCBs and test it and compare against VSSA that I built. If you have any suggestions to improve the layout (especially grounding), I would be happy to incorporate.
reg
prasi
Hello Prasi,
thank you for the nice words. I'm always reading here. I had only just not enough time to build for myself.
A really nice layout. Have you ever tested something?
Have fun with the amplifier!
Greetings Olaf
Thanks Olaf for your words of appreciation. Although I am not an accomplished builder like terry or you, I have had building experiences with chip amp, slewmonster, VSSA, PEECEEBEE, some PSU's, protects, etc. apart from speakers. Now VSSA resides in my main system. Layout is my hobby.🙂
regards
Prasi
so there are people who use eagle. I thought I was the only one. Nicely done. whats the size of your board?
reg
prasi
Cant use same layout /PCB for IRFP and 2SK/SJ. IRFP is GDS and latfets are GSD. You have to bend Transistor legs.😡 I cant say if that can be done in your layout.🙄
Congratulations!. can you tell some more about sound impressions, voltage that you are using, etc...
I see u used only one pair. .
reg
prasi
Last edited:
what percent are acetone and alcohol that you used,if you tried this method, and what would be your "golden ratio"? I am very interested in this method, that's why i am curious about details...
(sorry for the off-topic...)