quanghao,
I sent you an email as I am interested in boards. I think it would be great if you could post here the quantity available and the price per board.
Thanks,
Frd
I sent you an email as I am interested in boards. I think it would be great if you could post here the quantity available and the price per board.
Thanks,
Frd
Hi! First post here!
I'm after a good DAC to connect my Popcorn Hour C-200 (with blu ray installed). If I don't watch movies or play CDs I play good FLAC and lossless only - The source is vital.
I'm fairly new on this, but from what I collected there seems to be a big hype about certain brands(not unusual). The imaging on these systems is so good, it's better than the real thing. They might be technically perfect but for me way to expensive. I don't need a sledgehammer to crack a nut.
The rest of my system is a Yaquin MS-12B and Linn LK280 (got them both cheap) connected to Totem speakers.
I'm wondering how this DAC-END3 will be for me, will it fit my needs? How much approximately for a finished unit or kit?
Thank you and good luck quanghao!
I'm after a good DAC to connect my Popcorn Hour C-200 (with blu ray installed). If I don't watch movies or play CDs I play good FLAC and lossless only - The source is vital.
I'm fairly new on this, but from what I collected there seems to be a big hype about certain brands(not unusual). The imaging on these systems is so good, it's better than the real thing. They might be technically perfect but for me way to expensive. I don't need a sledgehammer to crack a nut.
The rest of my system is a Yaquin MS-12B and Linn LK280 (got them both cheap) connected to Totem speakers.
I'm wondering how this DAC-END3 will be for me, will it fit my needs? How much approximately for a finished unit or kit?
Thank you and good luck quanghao!
I've read through this thread and from what I know the Benchmark DAC1 seams to be a fantastical unit sonically!
Quanghao, the boards I ordered arrived yesterday. They look real nice however unfortunately the package contained two stage iv boards and did not contain the DAC board. Do you want me to mail back to you one of the stage iv boards and can you send me the missing DAC board . Thanks, John
Speaking about IV board: I can resell mine as I will not really use it. Drop me a PM if interested. Cheers. F
circuit diagram DAC-END 3 Update 2012
Hi! Quang Hào
Today I received the PCB, dac-end 3 update 2012.
I need you to send me or post circuit diagrams, parts list and position for the SMD components of this new revision.
Thanks.
Hi! Quang Hào
Today I received the PCB, dac-end 3 update 2012.
I need you to send me or post circuit diagrams, parts list and position for the SMD components of this new revision.
Thanks.
Hi :
Can anyone help ? I would like to know which Lundahl LL1660 to use : 10mA or 18 mA ? I would like to use it as OT for the parallel 5687 as suggested on this site.
Thanks in Advance.
Best regards,
NG
Can anyone help ? I would like to know which Lundahl LL1660 to use : 10mA or 18 mA ? I would like to use it as OT for the parallel 5687 as suggested on this site.
Thanks in Advance.
Best regards,
NG
According to here, it seems to be the 10mA
DAC End - the AD1865N-K with single ended vacuum output stage
Do
All of SMD components you can see is 0.1uF capacitor SMD. You can use SMD to replace the normal 0.1uF capacitors.
Does anybody know exact adress of Quang Hao?
He sent me wrong boards, asked to send them back and I can not get any info from him(
He sent me wrong boards, asked to send them back and I can not get any info from him(
This is the exact adress of Quang Hao write by Vietnamese:
Name: Nguyễn Quang Hào
Add: P 215 G4 Khu TT Bắc Thành Công-Ba Đình-Hà Nội-Việt Nam.
Tel: 0902578899
Hi all, anyone can help me? the bom of DAC-END-3 in the Board I/V 240 Ohm Resistor Tantalum x2 has no resistance number, which is the number and position of the 240 Ohm resistors on the pcb Tantalum since all are 220 Ohm.Thanks