• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Custom extruded heat sinks UK made

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Two sizes of very high quality heat sinks cut from 300mm wide extruded aluminium with 40mm deep fins. Manufactured by ABL in the UK. Cut slightly smaller than standard 2U and 3U format as I wanted slimmer cases for projects.

All metal is black anodised brand new and spotless.

4 off 70mm length - £25 a pair or £50 for all 4.

2 off 110mm length - SOLD

Postage UK £5

Payment by Paypal.
 

Attachments

  • IMG_0003.JPG
    IMG_0003.JPG
    664.7 KB · Views: 507
  • IMG_0005.JPG
    IMG_0005.JPG
    622.1 KB · Views: 505
  • 165ab.gif
    165ab.gif
    19.1 KB · Views: 498
Last edited:
20 fins on a 10mm backplate 200wide by 100mm tall gives Rth s-a of ~0.55C/W @ delta T= 75C
30 fins on 300 wide will be quite a bit lower.
reducing the height from 100mm to 70ish will increase by ~ sqrt(100/70) ~1.2
I would expect the 70mm Rth s-a ~ 0.45 to 0.5C/W
and the 110mm ~0.35 to 0.4C/W
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.