Contact Crown directly. If the material is not already on their web site for download, they have always been forthcoming with service documentation in response to my queries as long as I've worked on this stuff, so make a request either by email or phone.
It must be the month for Crown CL2 repairs. I have in my possession (2) Crown CL2 amplifiers. Both have no positive waveform what so ever. Is the fan supposed to turn on upon start up and then turn off? I have no fan operation at all. Never played with one before. Any help would be appreciated.
I have the schematic on PDF and would be glad to send it to anyone that needs it. Its too large to put on as an attachment here.
Had to bend the chassis in order to remove the board. Will have to make up some wire harness extensions in order to work on it effectively. Someone should be punished for designing something like this.
Interesting photographs. Is it difficult to repair amplifiers with Surface Mount Devices compared to traditional devices and are the surface mounted Semiconductors easily obtainable?
Are these type of PCB's also more prone to having damaged tracks which cause the PCB's to be non usable? Please excuse my questions as I do not have that much experience with repairing SMD populated power amplifiers.
Thx
Are these type of PCB's also more prone to having damaged tracks which cause the PCB's to be non usable? Please excuse my questions as I do not have that much experience with repairing SMD populated power amplifiers.
Thx
Had to bend the chassis in order to remove the board. Will have to make up some wire harness extensions in order to work on it effectively. Someone should be punished for designing something like this.
To answer your question.... for me this type of amplifier isn't repairable because I cannot deal with surface mount parts. My particular amplifier isn't showing surface track damage but I have seen it in the past on other amplifiers.
Mine is still sitting on the garage floor in a non- working state and I would consider selling it for a reasonable amount plus shipping cost just to get it to hell out of my sight.
Give me $10 plus shipping and it could be yours😱
irish1968
did you get yours running???
Mine is still sitting on the garage floor in a non- working state and I would consider selling it for a reasonable amount plus shipping cost just to get it to hell out of my sight.
Give me $10 plus shipping and it could be yours😱
irish1968
did you get yours running???
I am from Indonesia,,, are welcome to join in this great forum?
I was in Indonesia trouble to find the component Cl 2, (R40 & P1D P2D 5R6), if anyone could help me it costs how much??
thanks a lot🙂
I was in Indonesia trouble to find the component Cl 2, (R40 & P1D P2D 5R6), if anyone could help me it costs how much??
thanks a lot🙂
hi....i need the schematics of cl1,cl2...the complete board diagrams...
if possible send it to me...
djeventss@gmail.com
if possible send it to me...
djeventss@gmail.com
i need the schematic off cl2
i need the schematics of the cl2 can you send me the schematics please grupo_europa@hotmail.com
i need the schematics of the cl2 can you send me the schematics please grupo_europa@hotmail.com
HELLO I NEED THE CL1or CL2 CROWN AMPLIFIER SHEMATIC. IF ANYONE CAN HELP ME TO SEND TO MY EMAIL wrodriguez@parquefundidora.org
Good News: I watched a CL4 video on YT yesterday, That is a whole different animal. But the guy told us that the CL series has a more
commercial counterpart, and the CL4s should be C4000.
I thought the same would be true for CL1 and CL2, and it is. CL1 is the same schematic as CE1000, and CL2 as the CE2000A, and you can
find a service manual light on both models here: https://www.eserviceinfo.com/index.php?what=search2&searchstring=CROWN+C2000
commercial counterpart, and the CL4s should be C4000.
I thought the same would be true for CL1 and CL2, and it is. CL1 is the same schematic as CE1000, and CL2 as the CE2000A, and you can
find a service manual light on both models here: https://www.eserviceinfo.com/index.php?what=search2&searchstring=CROWN+C2000