Could anybody take a look at this crossover design as supplied to me? I am hoping sombody out there can suggest a better design.
The specs for drivers are at the following link and I have attached xover jpeg.
The Woofer is Silver flute W17RC38S08
The Tweeter is Vifa DX25SG0504.
http://www.solen.ca/
The specs for drivers are at the following link and I have attached xover jpeg.
The Woofer is Silver flute W17RC38S08
The Tweeter is Vifa DX25SG0504.
http://www.solen.ca/
Attachments
All designs are compromises.
This looks like a competent, simple design given the drivers.
Are you looking for something in particular?
If it were mine, I might target a LR4 acoustic target.
WAG is that would be second order electric, but I would have to have driver measurements to do more than guess.
Good Luck.
Doug
This looks like a competent, simple design given the drivers.
Are you looking for something in particular?
If it were mine, I might target a LR4 acoustic target.
WAG is that would be second order electric, but I would have to have driver measurements to do more than guess.
Good Luck.
Doug
XOVER
THese are the parameters. Fisrt woofer then tweeter
dB W Z Re Le Ce Fs Vas Qms Qes Qts Xmax
88 80 8 7.6 .89 16 41 24 1.5 .40 .31 ±5.0
94 140 4 2.8 .05 6.8 650 .02 4.3 .79 .67 ±0.5
THese are the parameters. Fisrt woofer then tweeter
dB W Z Re Le Ce Fs Vas Qms Qes Qts Xmax
88 80 8 7.6 .89 16 41 24 1.5 .40 .31 ±5.0
94 140 4 2.8 .05 6.8 650 .02 4.3 .79 .67 ±0.5
- Status
- Not open for further replies.