Posts 7, 8 & 10 show the PCB/s.
If you want to copy the IP belonging to Crimson, then ask Brain Powell for permission.
If you want to copy the IP belonging to Crimson, then ask Brain Powell for permission.
Broken Link
Hi Brian,
tried accessing this link
http://homepage.ntlworld.com/bepowel...tics/CPR1b.pdf
to no effect. The thread is a few years old. Have you moved house...🙂
Cheers,
Nigel
Hi Brian,
tried accessing this link
http://homepage.ntlworld.com/bepowel...tics/CPR1b.pdf
to no effect. The thread is a few years old. Have you moved house...🙂
Cheers,
Nigel
Thanks Andrew,
Emailed Brian Powell for details of repairs etc. He is alive and well and still doing repairs... 🙂
The link was broken apparently because Virgin don't allow free storage.
All the best,
Nigel
Emailed Brian Powell for details of repairs etc. He is alive and well and still doing repairs... 🙂
The link was broken apparently because Virgin don't allow free storage.
All the best,
Nigel
Anybody know how to set the trimpot on CE1708 modules, I’m guessing it’s the standing current in one of the supply lines with or without load ???
20mA in positive supply line. See 2nd page in this file posted above: http://www.diyaudio.com/forums/attachments/solid-state/595231d1485631575-crimson-elektrik-pcbs-crimsonce1008vii-pdf
Load connected or not shouldn't matter as long as offset is low enough.
- Status
- Not open for further replies.