• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

CRC Power Supply (Class A amplifier)

mcandmar (4 boards) ok, delivered
Project16 (2 boards) ok, delivered
Myint67 (6 board ) ok, shipped
gwrskien (10 boards) ok, shipped
asuslover (4 boards)ok, shipped
Morde (2 boards) ok, delivered
Ryssen (2 boards) ok, shipped
Marra (4 boards) ok, delivered
gnomcat (10 boards) ok, shipped
bloozestringer (4 boards) ok, shipped
bOTL (10 boards) ok, shipped
Prasi (2 boards) ok :)
emynet (2 boards)ok, shipped
Sadik (2 boards)ok, delivered

joshvi (4 boards) ok, details awaited
zrxshack (4 boards) ok,details awaited
microx (2 boards) ok, details awaited
outtek (4 boards) ok, details awaited

patriz (4 boards) ok , invoice sent
TIC37 (4 boards)ok, invoice sent
JJGB (6 boards) ok, invoice sent

rephil (10 boards)ok, will ship tomorrow
mituisho (4 boards) ok, will ship tomorrow
Pepperman (4 boards) ok, will ship tomorrow
Nounouchet (4 boards) ok, will ship tomorrow
Joca (4 boards) ok, will ship tomorrow
883bkong(4 boards) ok, will ship tomorrow
bk856er(2 boards) ok, will ship tomorrow
quan (4 boards) ok, will ship tomorrow
oceanpeak (8 boards) ok, will ship tomorrow


from reserve list,
polaron (4 boards) ok, PM sent

Unfortunately, today there was postal strike across the country, so couldnt ship. Will ship tomorrow, if post opens.
 
Last edited:
mcandmar (4 boards) ok, delivered
Project16 (2 boards) ok, delivered
Myint67 (6 board ) ok, shipped
gwrskien (10 boards) ok, shipped
asuslover (4 boards)ok, shipped
Morde (2 boards) ok, delivered
Ryssen (2 boards) ok, shipped
Marra (4 boards) ok, delivered
gnomcat (10 boards) ok, shipped
bloozestringer (4 boards) ok, shipped
bOTL (10 boards) ok, shipped
Prasi (2 boards) ok
emynet (2 boards)ok, shipped
Sadik (2 boards)ok, delivered

*
zrxshack (4 boards) ok,shipped
patriz (4 boards) ok , shipped
JJGB (6 boards) ok, shipped
rephil (10 boards)ok, shipped
mituisho (4 boards) ok, shipped
Pepperman (4 boards) ok, shipped
Nounouchet (4 boards) ok, shipped
Joca (4 boards) ok, shipped
883bkong(4 boards) ok, shipped
bk856er(2 boards) ok, shipped
quan (4 boards) ok, shipped
oceanpeak (8 boards) ok, shipped
*

joshvi (4 boards) ok, will ship tomorrow
TIC37 (4 boards)ok, on-hold (as requested)

microx (2 boards) ok, pm sent
outtek (4 boards) ok, pm sent

from reserve list,
polaron (4 boards) ok, PM sent

if there is no response from microx, outtek and polaron, i shall pass the boards to fulfill reserve list requirements.

list of people between asterisks(*--*): i will share the shipment details tomorrow by PM.

reg
Prasi
 
Last edited:
mcandmar (4 boards) ok, delivered
Project16 (2 boards) ok, delivered
Myint67 (6 board ) ok, shipped
gwrskien (10 boards) ok, shipped
asuslover (4 boards)ok, shipped
Morde (2 boards) ok, delivered
Ryssen (2 boards) ok, shipped
Marra (4 boards) ok, delivered
gnomcat (10 boards) ok, shipped
bloozestringer (4 boards) ok, shipped
bOTL (10 boards) ok, shipped
Prasi (2 boards) ok
emynet (2 boards)ok, shipped
Sadik (2 boards)ok, delivered

zrxshack (4 boards) ok,shipped
patriz (4 boards) ok , shipped
JJGB (6 boards) ok, shipped
rephil (10 boards)ok, shipped
mituisho (4 boards) ok, shipped
Pepperman (4 boards) ok, shipped
Nounouchet (4 boards) ok, shipped
Joca (4 boards) ok, shipped
883bkong(4 boards) ok, shipped
bk856er(2 boards) ok, shipped
quan (4 boards) ok, shipped
oceanpeak (8 boards) ok, shipped

joshvi (4 boards) ok, will ship tomorrow
TIC37 (4 boards)ok, on-hold (as requested)


ok, i am cancelling the requirements from microx, outtek and polaron and inviting following people to take the boards

Algar_emi (2 boards) ok
gabbar (4 boards) ok.
bogde (2 boards) ok
PauloPT (2 boards) ok

kindly share your details (name, full postal address with pincode, country, paypal) via PM , I am hoping to hear from you guys sooner , already got details from bogde, thanks a lot


reg
Prasi
 
Last edited:
mcandmar (4 boards) ok, delivered
Project16 (2 boards) ok, delivered
Myint67 (6 board ) ok, shipped
gwrskien (10 boards) ok, shipped
asuslover (4 boards)ok, shipped
Morde (2 boards) ok, delivered
Ryssen (2 boards) ok, shipped
Marra (4 boards) ok, delivered
gnomcat (10 boards) ok, shipped
bloozestringer (4 boards) ok, shipped
bOTL (10 boards) ok, shipped
Prasi (2 boards) ok
emynet (2 boards)ok, shipped
Sadik (2 boards)ok, delivered

zrxshack (4 boards) ok,shipped
patriz (4 boards) ok , shipped
JJGB (6 boards) ok, shipped
rephil (10 boards)ok, shipped
mituisho (4 boards) ok, shipped
Pepperman (4 boards) ok, shipped
Nounouchet (4 boards) ok, shipped
Joca (4 boards) ok, shipped
883bkong(4 boards) ok, shipped
bk856er(2 boards) ok, shipped
quan (4 boards) ok, shipped
oceanpeak (8 boards) ok, shipped

joshvi (4 boards) ok, shipped
TIC37 (4 boards)ok, shipped

gabbar (4 boards) ok shipped
bogde (2 boards) ok, shipped
PauloPT (2 boards) ok, shipped


Algar_emi (2 boards) ok, details awaited


kindly confirm delivery either here or through pm and i shall consolidate and post here..


reg
Prasi
 
its somewhat unfortunate that outtek, microx and polaron after committing to the GB did not care to respond when request was sent..if there is/was a genuine reason, they could have responded to my PM, like bristto did (even the gentleman offered to honor his commitment, but I declined).... I can perfectly accept the reasons.

I am fortunate that there were people already on reserve list who supported...otherwise I would have been stuck with extra PCB's I had no use for atleast in foreseeable future...which would have been a waste of my hard earned money:(

Just wanted to post my opinions... sorry for OT.
reg
Prasi
 
Last edited:
mcandmar (4 boards) ok, delivered
Project16 (2 boards) ok, delivered
Myint67 (6 board ) ok, shipped
gwrskien (10 boards) ok, shipped
asuslover (4 boards)ok, delivered
Morde (2 boards) ok, delivered
Ryssen (2 boards) ok, shipped
Marra (4 boards) ok, delivered
gnomcat (10 boards) ok, shipped
bloozestringer (4 boards) ok, shipped
bOTL (10 boards) ok, shipped
Prasi (2 boards) ok :)
emynet (2 boards)ok, shipped
Sadik (2 boards)ok, delivered

zrxshack (4 boards) ok,shipped
patriz (4 boards) ok , shipped
JJGB (6 boards) ok, shipped
rephil (10 boards)ok, shipped
mituisho (4 boards) ok, shipped
Pepperman (4 boards) ok, shipped
Nounouchet (4 boards) ok, shipped
Joca (4 boards) ok, shipped
883bkong(4 boards) ok, shipped
bk856er(2 boards) ok, shipped
quan (4 boards) ok, shipped
oceanpeak (8 boards) ok, shipped

joshvi (4 boards) ok, shipped
TIC37 (4 boards)ok, shipped

gabbar (4 boards) ok shipped
bogde (2 boards) ok, shipped
PauloPT (2 boards) ok, shipped
Algar_emi (2 boards) ok, will ship tomorrow

0 boards remain.


kindly confirm delivery either here or through pm and i shall consolidate and post here..

reserve list

aubmar (2 boards) ok, details received
jkjkaufm (6 boards) ok
pesve (4 boards) ok

reg
Prasi
 
Last edited:
its somewhat unfortunate that outtek, microx and polaron after committing to the GB did not care to respond when request was sent..if there is/was a genuine reason, they could have responded to my PM, like bristto did (even the gentleman offered to honor his commitment, but I declined).... I can perfectly accept the reasons.

I am fortunate that there were people already on reserve list who supported...otherwise I would have been stuck with extra PCB's I had no use for atleast in foreseeable future...which would have been a waste of my hard earned money:(

Just wanted to post my opinions... sorry for OT.
reg
Prasi
Parsi Hello
You are absolutely correct to feel this way. At the minimum these guys should respond with a PM. In the future a small deposit would help solve the issue.
Thanks for your time and help.
bOTL
 
My board arrived today .
Quality is super .
Thx

Best

Parsi Hello
You are absolutely correct to feel this way. At the minimum these guys should respond with a PM. In the future a small deposit would help solve the issue.
Thanks for your time and help.
bOTL

Hi Myint67,
thanks for your confirmation and appreciation...hope you have wonderful experience building and using these psu pcb's.
Hi bOTL,
thanks for your very good advice, let me check if its feasible...

reg
Prasi
 
Parsi Hello
You are absolutely correct to feel this way. At the minimum these guys should respond with a PM. In the future a small deposit would help solve the issue.
Thanks for your time and help.
bOTL
Hi guys and Prasi, I do apologize for not being able to respond in time but unfortunately I work most of the year offshore and the internet and schedule does not allow me fast responses especially if active operations are happening, I did manage to get a decent connection and the time to respond but unfortunately to late apparently, I agree that for some users is ok to do it in some way to save yourself from situations like these but a few day would be ok to wait, in my case the initial paypal account while trying to send Prasi an e-mail did not work, I had to make another one , but again to late.
Any case sorry to Prasi about this but some things are a bit out of my control.
Regards to all members.