• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Counterpoint SA-3.1 Rebuild

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
R

ron944

Member
Joined 2010
Hi, I am doing a complete rebuild on my Counterpoin SA-3.1 and had a question. I was able to download a schematic for the 3.1 from Audio-Circuit.dk and if shows using 1uf/200v P.P caps for the phono sections as well as the line stage output coupling caps C18,20,118,120. The originals caps are 3uf Wonder caps, also the 2 watt plate load resistors for the line stage show 13k on the schematic, the original are 22k. All other values are the same. I have never been great with the math (lazy I guess). Will using 1uf caps or the 13k resistors cause a problem.

Thanks in advance, Ron
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom