Conrad heatsinks group buy

[rob3262]

Bubba, there is interest in Top/bottom cover GB. Can you post pics? (not of the vacation...)

- Rob

 

[bubba177]

here is a pic

 

[cwujek]

here is a pic

If this is going to happen, I will need to get the hole spacing and size to use with this cover, so that everything lines up properly. Looks nice though, I would probably be in for a set.

 

[claiborne]

1 set for me too

If this bottom/top GB happens I would like to get a set also. Thanks!

-claiborne

 

[rdk845]

Re: 1 set for me too

If this bottom/top GB happens I would like to get a set also. Thanks!

-claiborne

Same here.

By the way, cwujek , I Pmed you my e-mail address, but still haven't got anything. I don't know why e-mail is not working.

 

[bubba177]

here is a pic with the cover off--these covers were cut with a mill at a machine shop to get right between the holes for a perfectly smooth edge-no shear can do this.i will go to the machine shop next week to get a rough idea of what 20 sets would cost

 

[hc167]

I may be interested getting the top and bottom panel also. Please let me know the dimension.

 

[Ed LaFontaine]

I just revised my interest in the wiki from 4 down to 2. Chris, ygm.

A link to the wiki can be found in post 117

 

[ichiban]

I'm in.....

I've added 2 sinks to the wiki.

I would be interested in top & bottom covers.

 

[RonD2]

I also would buy one set of the top and bottom covers.

 

[Westley]

I would be interested in a set of four covers (total of 8) if possible.

 

[bubba177]

i just got some sticker shock-- a 48x120 inch sheet of perforated aluminum is 702.00, 40.00 to shear it into 15x15 rough pieces.i haven't heard back from the machine shop that will mill it to 13x13 but i'm going to go out on a limb a quess at a total price of 85-100 a set. anyone still interested at these prices-or scrap the idea-bubba

 

[rob3262]

No the price point I had in mind.

I'll consider other options for use with these Conrads

 

[ichiban]

Top & bottom covers

Only the heatsinks thanks.

 

[rdk845]

i just got some sticker shock-- a 48x120 inch sheet of perforated aluminum is 702.00, 40.00 to shear it into 15x15 rough pieces.i haven't heard back from the machine shop that will mill it to 13x13 but i'm going to go out on a limb a quess at a total price of 85-100 a set. anyone still interested at these prices-or scrap the idea-bubba

Heat sinks only for me. Thanks.

I feel that the quoted price of perforated sheet is very high. what is the thickness that you were thinking of?

 

[claiborne]

Thanks for the effort, but at that price I will have withdraw my interest in the covers.


-claiborne

 

[bubba177]

i thought it was high to -i got the quote from a metal supermarket in st louis-let me check another source-bubba

 

[bubba177]

oh --thickness is .125 1/8 inch--can be had in 5/16 3/8 and 1/2 spacing on the holes

 

[bubba177]

just went to online metals-their price was 31.00 pc--wonder if a solid sheet is cheaper-we could use a solid on bottom and a perforated on top-maybe get our cost down

 

[bubba177]

it's higher!!!! nix that idea--guess i'll have to dumpster dive for scraps