Good morning everyone!
I'm having a hard time figuring out a 3-way speaker with this woofer.
The company information takes into account the trunk of the car to help with the acoustics.
But I intend to use it in my living room.
And I could not tell if the box is closed or vented.
Can someone help me about it?
The info about the woofer is below:
http://i-jbl.a8e.net.br/static/pdf/woofer-12mg1000---4.pdf
Thanks.
I'm having a hard time figuring out a 3-way speaker with this woofer.
The company information takes into account the trunk of the car to help with the acoustics.
But I intend to use it in my living room.
And I could not tell if the box is closed or vented.
Can someone help me about it?
The info about the woofer is below:
http://i-jbl.a8e.net.br/static/pdf/woofer-12mg1000---4.pdf
Thanks.
Last edited:
Simplest.... Go get WinISD 0.7.950
WinISD - Linearteam
Add your speaker parameters if you need to.
Use WinISD to model the response. You can see suggested box volume and port sizes. Response changes with alignment.
HTH
J.
WinISD - Linearteam
Add your speaker parameters if you need to.
Use WinISD to model the response. You can see suggested box volume and port sizes. Response changes with alignment.
HTH
J.
Yes, I saw the TS parameters of the woofer, it has high Qts (the box must be large) but also high Fs (deep bass is not possible).Thank you Sonce!
Did you saw the spec of the woofer?
Unfortunately, no.Maybe with a tube, this can down a lithe more
Sell the loudspeakers and buy a better JBL/Selenium model.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- Calculation for woofer