I am happy to announce that this project is ready to roll! I want to thank Adam at Madisound and Jack Hidley (formerly of NHT) for making all of this possible. Also many thanks to Mark K and Jeff Bagby for their help with crossover design feedback during development.
PROJECT DESCRIPTION:
The NC DIY AUDIO 2010 Budget 2-way is a small, high-performance sealed bookshelf speaker using a 5.25" woofer and a 1" tweeter. The crossover was designed by Jeff Bagby. Distortion measurements done on the drivers by Mark K (see link below) show that both provide excellent bang-for-the-buck performance! The speaker's frequency response should be within +/- 2dB above 150Hz. Output below 100Hz is limited - a subwoofer with a 2nd order or higher crossover at 150Hz is recommended for realistic bass output levels and accurate, low distortion, full-range reproduction.
There is a thread about this project with measurements and the crossover schematic at Mark K's website:
NC DIYAUDIO 2 way budget project
For more info on how to purchase and build this speaker, please refer to the following build thread:
Building the NC DIY AUDIO 2010 Budget 2-way Project - Techtalk at Parts-Express.com
Let the building begin!
-Charlie
PROJECT DESCRIPTION:
The NC DIY AUDIO 2010 Budget 2-way is a small, high-performance sealed bookshelf speaker using a 5.25" woofer and a 1" tweeter. The crossover was designed by Jeff Bagby. Distortion measurements done on the drivers by Mark K (see link below) show that both provide excellent bang-for-the-buck performance! The speaker's frequency response should be within +/- 2dB above 150Hz. Output below 100Hz is limited - a subwoofer with a 2nd order or higher crossover at 150Hz is recommended for realistic bass output levels and accurate, low distortion, full-range reproduction.
There is a thread about this project with measurements and the crossover schematic at Mark K's website:
NC DIYAUDIO 2 way budget project
For more info on how to purchase and build this speaker, please refer to the following build thread:
Building the NC DIY AUDIO 2010 Budget 2-way Project - Techtalk at Parts-Express.com
Let the building begin!
-Charlie
fully-assembled crossovers now available
These beauties are available from Madisound, specifically for this project and ready to use.
See this post for info on how to order the crossovers.
These beauties are available from Madisound, specifically for this project and ready to use.
See this post for info on how to order the crossovers.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.