Box volume reduction with high pass filter

[GM]

14mm p-p and super low LE sound a bit off (?)

I wondered about that too........

 

[freddi]

(thought he wanted "fullrange small")


Here's 2.5 liter with a simple passive highpass with 100uF cap and 4mH inductor.


It would catch fire long before running out of excursion as 40 volts gives around 3.6mm peak

 

[freddi]

take it down to 1.5 liters - apply ~700 watts - note my typo

the inductor is now 3mH

 

[freddi]

- and keep on going down in size while up in frequency .

you can now plug it into US 120v AC mains or wideband for a peak of 3.5mm (that's a joke son...)

1 liter with 56uF/2.2mH highpass

 

[freddi]

and at 0.25 liter, the cone "would move" a bit over 2mm for 240V input 😀

 

[GM]

You're a 'sick puppy', Freddi. 😉

 

[Henkjan]

14mm p-p and super low LE sound a bit off (?)

Here's a sim in 20 liters with 700uF series cap.

for fairly flat I'd go for 30 liters, some stuffing, and a ~1000µF cap. f3~45Hz

 

[freddi]

30 liter/1000uF sounds good. I wanted to look at the SEAS/Dynaco 2-chanber case using hornresp but can't apply the passive filter.


Here's how hornresp interprets 30 liter with 1000uF -ignore the 240v spl - the excursion is interesting😀

 

[Henkjan]

.... the 240v spl - the excursion is interesting 😀

I expect it to be more than 150mm 😎