Just thought I'd show everyone what I'm up to. I'm rebuilding the case for my DC-50 and came up with something unusual for SS guys. The heatsinks I bought for 50.00 off E-Bay. I'm using seperate trans. for the driver and output with a regulated front end. These will be 20 watt monoblocks and I hope to use them in my HT setup with an A75 and a couple of paramours from Bottlehead. Maybe someone caould use this Idea for themselves.🙄
Well I tried to post pix with this thread but they didn't work. Now what?
Well I tried to post pix with this thread but they didn't work. Now what?
Hi Skippy
I'm looking forward to seeing your pictures. I'm using about a 150W or more version of the DC50 but with bipolar outputs. Same transformer configuration as you.
The amps are built on a piece of 3/4" MDF right now. I've been looking for some ideas to finally package these things up and that might require different heatsinks.
Phil
I'm looking forward to seeing your pictures. I'm using about a 150W or more version of the DC50 but with bipolar outputs. Same transformer configuration as you.
The amps are built on a piece of 3/4" MDF right now. I've been looking for some ideas to finally package these things up and that might require different heatsinks.
Phil
Oh well, I can't get a pix to load. Keeps telling me File too big. If anyone wants to see them send me an E-mail and I'll send you the pix.
Skippy:
I'd like to see the pics. I built a Servo 50 some time back. Mine is biased for class a before going to class a/b also, but I don't remember how much. Pretty sure it's not 20 watts though.
My pics are at my web site
I'd like to see the pics. I built a Servo 50 some time back. Mine is biased for class a before going to class a/b also, but I don't remember how much. Pretty sure it's not 20 watts though.
My pics are at my web site
Skippy,
Try putting the picture in a zip file then put the zip file up here....
If that dont work you'll need to do the following:-
1.Resize the picture so it is no larger than 800 pixels wide and 600 pixels long.
2.If the picture is full colour save it as a jpeg .... if it only has a few colours (like a schematic) then save it as gif.
3.Upload it here.
Try putting the picture in a zip file then put the zip file up here....
If that dont work you'll need to do the following:-
1.Resize the picture so it is no larger than 800 pixels wide and 600 pixels long.
2.If the picture is full colour save it as a jpeg .... if it only has a few colours (like a schematic) then save it as gif.
3.Upload it here.
- Status
- Not open for further replies.