theAnonymous1 said:hitting 150-152db yet? BTW, I like the drywall screws. I would have used pan heads or t-nuts, but what the hell do I know.
which of the screws will be louder? (drywall, panhead or Tnut?)
hitting 150-152db yet? BTW, I like the drywall screws. I would have used pan heads or t-nuts, but what the hell do I know
It's your world boss, I'm just building speakers in it.......
Hey, use all the drywall screws you want on your own stuff, but you mentioned this setup is for someone else. I would be pretty ****ed if I had 6 new tempests and someone bent the frames because they were to lazy to go to the hardware store and get a more appropriate type of screw.
theAnonymous1 said:Hey, use all the drywall screws you want on your own stuff, but you mentioned this setup is for someone else. I would be pretty ****ed if I had 6 new tempests and someone bent the frames because they were to lazy to go to the hardware store and get a more appropriate type of screw.
LOL....you need to find a less stressful hobby my man..
enough from you...
Mike, you don't hit 150+, and I'm CUTTING YOU OFF FROM ALL DRIVERS... Looking forward to seeing/experiencing this beast!
Dan-
I don't hit 150db+ then I am buying 6 Brahma 15's.....
I just hope we have enough power! I'm about 500 watts less than I wanted to be at........
-Mike
She nailed a 154.5 last night on an Audio Control with 2kw. We are taking it Adire this weekend to put it on the Termpro. I'll also try some more power there and see how much louder she'll get..... Subs seem to be fine with 2KW whoopin' on them for a couple of hours........
Tomorrow is the big day for you 95honda....
Getting on the Termlab at Adire Audio ....
show anonaonaonamaousesed one if you can blow a 150+....
Anybody care to place a friendly wager on it??????
Who has $20 paypal that says he can't do a 150+at the head rest on the termlab
Or anywhere?
Just curious.......
I got faith in him....I hope it wangs man.....take digital video of it so you can post it up somewhere....
Getting on the Termlab at Adire Audio ....
show anonaonaonamaousesed one if you can blow a 150+....
Anybody care to place a friendly wager on it??????
Who has $20 paypal that says he can't do a 150+at the head rest on the termlab
Or anywhere?
Just curious.......
I got faith in him....I hope it wangs man.....take digital video of it so you can post it up somewhere....
Here is 95honda's project ...
I took a picture of the mic screen at 152.8...he managed a 152.9 later on but i didn't get that...
Termlab baby.
WELL DONE 95HONDA...
Just for the record...he did 150.2 at the headrest
One of the loudest street machines in Washington with no equal in site... you win
I took a picture of the mic screen at 152.8...he managed a 152.9 later on but i didn't get that...
Termlab baby.
WELL DONE 95HONDA...
Just for the record...he did 150.2 at the headrest
One of the loudest street machines in Washington with no equal in site... you win
Attachments
They found that peak output was with a ~50 Hz signal. It's pretty common in dB competitions to play tones above the tuning frequency - not many people burp right at tuning, especially in the street classes. At least that's what I've seen from my limited exposure. I figured this would be common knowledge for someone with a lot of time in SPL competition, and daily use of a Termlab meter...theAnonymous1 said:Congratulations............ My only question is why does termlab show a burp of around 51hz if the box was tuned "dead on at 32hz"?
There was also a Chevelle here that burped a 145+ at 25 Hz. Six Tempests in a sealed box, no less (not ported). Also built by 95Honda. that was just wicked, and the car itself was stunning in its install. Having >145 dB SPL from 25 Hz and up is truly an amazing accomplishment!
Mike, my hat's off to you! You know how to get loud...
Dan Wiggins
Adire Audio
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- Big System