I have been looking all over for a plan...
Another update, i have still not recieved any input on plan to house the lcd, so i am going to pick up some plexi, wood and my plan is to keep with the existing overhead i have(dukane 4000)
Already i had to take the top off the overhead, and manually modify it's size, with a dremel tool, so it can act fit to the 15" lcd
Now i am at the point where i'd like to get rid of the 2 pieces of glass, and mess i have here(it's very sloppy sitting on the top, and i really want to get all the dust, and a cooling system in place, so im going to build an overhead/box design, when complete i plan i buying a camera, and taking a few pics to help those who aren't carpenters, and want some insight for a way to use a dukane/materials, and not have to reinvent the wheel
Another update, i have still not recieved any input on plan to house the lcd, so i am going to pick up some plexi, wood and my plan is to keep with the existing overhead i have(dukane 4000)
Already i had to take the top off the overhead, and manually modify it's size, with a dremel tool, so it can act fit to the 15" lcd
Now i am at the point where i'd like to get rid of the 2 pieces of glass, and mess i have here(it's very sloppy sitting on the top, and i really want to get all the dust, and a cooling system in place, so im going to build an overhead/box design, when complete i plan i buying a camera, and taking a few pics to help those who aren't carpenters, and want some insight for a way to use a dukane/materials, and not have to reinvent the wheel
Hi!
Does anyone of you have the measurements of the benq 557s V2 TFT LCD (stripped) written down?
If then I'd like to have a copy so I can start with the box and have its place finished before stripping it!
Thanks
ade
Does anyone of you have the measurements of the benq 557s V2 TFT LCD (stripped) written down?
If then I'd like to have a copy so I can start with the box and have its place finished before stripping it!
Thanks
ade
Hi there,
I am planning to split my Medium 10K's fresnel and according to your instructions, tilt my benq 567s 20'degrees backward.
I also want a keystone correction, so I figured out that tilting the upper fresnel forward could do the job.
So far I have 2 alternatives of doing the job:
1. Tilt benq 20'degrees backward, and tilt the upper fresnel a little more forward.
2. Tilt benq 20'degrees backward, but turn it 180'degrees around on top of the OHP. And tilt the fresnel same way as in the previous option. Now the image would be upside down, but it could be corrected by the drivers of the display card (ATI RADEON 9700).
Why I considered this option, is because the gap between the lcd-panel and the top fresnel would be more even than in the 1.option.
But I would rather not use the driver software to turn the image upside down, because I am not sure if this will work with all the games etc.
So is there any sense in these ideas?
Hope you can get the idea from my crappy paint pictures.
I am planning to split my Medium 10K's fresnel and according to your instructions, tilt my benq 567s 20'degrees backward.
I also want a keystone correction, so I figured out that tilting the upper fresnel forward could do the job.
So far I have 2 alternatives of doing the job:
1. Tilt benq 20'degrees backward, and tilt the upper fresnel a little more forward.
An externally hosted image should be here but it was not working when we last tested it.
2. Tilt benq 20'degrees backward, but turn it 180'degrees around on top of the OHP. And tilt the fresnel same way as in the previous option. Now the image would be upside down, but it could be corrected by the drivers of the display card (ATI RADEON 9700).
An externally hosted image should be here but it was not working when we last tested it.
Why I considered this option, is because the gap between the lcd-panel and the top fresnel would be more even than in the 1.option.
But I would rather not use the driver software to turn the image upside down, because I am not sure if this will work with all the games etc.
So is there any sense in these ideas?
Hope you can get the idea from my crappy paint pictures.
- Status
- Not open for further replies.