biginning my aleph 30
Hello ,
after the citation 12, I just got started on this aleph 30, I am at the biginning of the construction,so I will post some picts over here just to show progression...
I may need your help and advises regarding to the trimmings (if any...?) of the amp during the firing process!
have fun😀
Vince
Hello ,
after the citation 12, I just got started on this aleph 30, I am at the biginning of the construction,so I will post some picts over here just to show progression...
I may need your help and advises regarding to the trimmings (if any...?) of the amp during the firing process!
have fun😀
Vince
Attachments
Thats seems to be a nice work, could you post some bigger pictures, it's a bit to little to appraciate the work.
Marc
Marc
Sure tomorrow, I'll get more light, so i'll be able to take a better closeup sict...anyway nothing is assembled yet, it's just a presentation for the moment, so I can see if everything fits well together...
Cheers!
Vince
Cheers!
Vince
They look kind of "Krell'ish" I am sure a lot of the guy's around here will love them indeed🙂 Did you design the boards yourself?
Steen😎
Thanks guys😉
well I spent about 8 weeks over the web for suppliers, and finally 10 of them from the whole material and accessories and components from en electronic engeneer that retired and sold all he had in his basement, needless to say that I have enough transistors for the rest of my life😀
anyway I discovered that a society called richardson here in France also makes them...)
will add some new picts tomorrow😎
well I spent about 8 weeks over the web for suppliers, and finally 10 of them from the whole material and accessories and components from en electronic engeneer that retired and sold all he had in his basement, needless to say that I have enough transistors for the rest of my life😀
anyway I discovered that a society called richardson here in France also makes them...)
will add some new picts tomorrow😎
the boards are from brian GT (for the BF gainstage) and for the final powerfets, I designed the boards in copper plates and tubes...
Vince
Vince
looks like Chocky has already resumed what comments my girlfriend will make when this monster will pop up in the living room
a test this aleph has to run good, far from the damping factor is the wife acceptance factor 😀 just a big heavy glass plate on it , some leds here and there...and you have a neat , modern table for coctails and living room sittings😱 😀
Vince
a test this aleph has to run good, far from the damping factor is the wife acceptance factor 😀 just a big heavy glass plate on it , some leds here and there...and you have a neat , modern table for coctails and living room sittings😱 😀
Vince
Hi guys,
here is the work of the day...sorry for the small low res picts, but will corect that soon🙂 I'll insert Brian GT gain cards tomorrow,
by the way, did anyone detect any problem with the aleph 30 when cards were far from the fets? I may get about 4 inch long cable for the gates wire , actually about the shortest I can do...may that be critical regarding oscillation of the fets?
Vince
here is the work of the day...sorry for the small low res picts, but will corect that soon🙂 I'll insert Brian GT gain cards tomorrow,
by the way, did anyone detect any problem with the aleph 30 when cards were far from the fets? I may get about 4 inch long cable for the gates wire , actually about the shortest I can do...may that be critical regarding oscillation of the fets?
Vince
Attachments
- Status
- Not open for further replies.