I have Wilson WATT 3 speakers on custom made stands. These stands are 24 x 16 x 11 and were made from one inch mdf. So they are pretty solid.
So Now I am thinking of making them into woofer towers. I have a good dedicated sub, so I am really only thinking of improving dynamics in the region 60Hz to 200Hz.
Since the width of the box will be 11 inches, I guess I would talking a 10 inch or under driver. And I would prefer sealed.
I have an active crossover (LR slopes) and plenty of amp power.
Any thoughts on a good bass(ish) driver? Initial thoughts were the SEAS 10" aluminium as used in the Wilson Sofia, or the Scanspeak 8545. I have also been recommended the Lambda 10 inch.
But I would welcome all thoughts and suggestions.
Steve
So Now I am thinking of making them into woofer towers. I have a good dedicated sub, so I am really only thinking of improving dynamics in the region 60Hz to 200Hz.
Since the width of the box will be 11 inches, I guess I would talking a 10 inch or under driver. And I would prefer sealed.
I have an active crossover (LR slopes) and plenty of amp power.
Any thoughts on a good bass(ish) driver? Initial thoughts were the SEAS 10" aluminium as used in the Wilson Sofia, or the Scanspeak 8545. I have also been recommended the Lambda 10 inch.
But I would welcome all thoughts and suggestions.
Steve
navin said:u could use a JX150 with a aperiodic vent
Good idea. Aperiodic enclosures are probably one of the last of the cut-n-try box methodologies now that decent modeling is available for quarterwave designs.
I have had some very good successes with aperiodic boxes.
dave
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- Bass(ish) driver for 1.5cf sealed box.