Like AZ1021S, we now design full featured versions for dual dam1121. Taking into account the users and the cost of dual dam1121 , this setup kits will mainly for own use, a few pieces will be shared.
This will be most interesting!
Do you mean the source code?Sorry, we're not going to open source code. Software and hardware must be matched, the switchs on the PCB board also needs software to control.The PDF document for Soekris has instructions for control, and if you want to try it yourself, it's easy to implement control with Arduino.
Do you mean the source code?Sorry, we're not going to open source code. Software and hardware must be matched, the switchs on the PCB board also needs software to control.The PDF document for Soekris has instructions for control, and if you want to try it yourself, it's easy to implement control with Arduino.
got it, thank you
The chassis is really a problem. I designed it. But less orders, it is difficult to find suitable processors. And chassis packing and shipping costs are not cheap. I plan to make a sample chassis this month to verify the design. I'll update the progress of the chassis here.
I am sure that many here who has bought you fantastic setup kit will be happy support this endeavour with a pre-order.
Can I buy in this Moment Lite version?Thank Roman
Yes,SK and SK Lite are all available.If you want to buy, please PM your email to me.
@rotr
no, I bought the chassis via ebay, here is the link:
Douk Audio Aluminum Chassis Power Amplifier Enclosure PCB Vorverstarker Gehause | eBay
Greetings Arnd
no, I bought the chassis via ebay, here is the link:
Douk Audio Aluminum Chassis Power Amplifier Enclosure PCB Vorverstarker Gehause | eBay
Greetings Arnd
Hello I bought the (AZ OLED setup kits for Soekris) the 07/12/17
have is the 12/29/17 the parcel is still in transit in china !! ????
not very serious !!!
I have nothing against Leon who looks very nice!
I'm terribly sorry. I've already contacted the postal service. They say parcels are now in China Customs. If there is no progress after the New Year holiday, I'll send you another setup kits.
I'm sorry to have kept you waiting so long.
Hallo audiozenTransformer choice
Talema 7va dual 7v AC
Talema 15va or 25va ,If you supply dam1021 with DC, you can choose dual 12v ac output. If you supply dam1021 with AC, you can choose dual 7v ac output.
Thank you for your "DAM 1021 SK" motherboard! Great offer! It will allow me to build a Soekris dam1021 based R-2R DAC.
Sorry for the more basic questions but I am still a beginner in these thinks...
* You mentioned the Amanero "Combo384 Module" USB board. I will play Flac(-HR) and DSD files coming from my JRMC PC. The PC will be my only souce. Is there any pro and cons compared to the diyinhk "USB to I2S 768Khz - DSD512/1024* Converter"
* Is it possible to use the diyinhk board instead the Amanero?
* The shown cable connecting the pcb usb-Port with the piggyback Amanero board is included?
* If I want to change the SW within the dan1021 dac I still have to solder/ connect a seperate rs232 cable to the Soekris board, right?
* I understand that the Transformers are not includet. What I didn't get is the choise I have for a 230V country...
* I believe in the advantage of oversized power supplies instead of just enough power supplies For what reason do I need one or two Transformers?
* Do I have to solde ranything else on your motherboard then the transformers?
* Where do I connect a (un) balanced headphone? Is there a auto recognition for these to silence the RCA / XLR connectors than?
greetings
F.S.
Last edited:
* Is it possible to use the diyinhk board instead the Amanero?
Yes, please connect to I2S by definition.
* The shown cable connecting the pcb usb-Port with the piggyback Amanero board is included?
included
* If I want to change the SW within the dan1021 dac I still have to solder/ connect a seperate rs232 cable to the Soekris board, right?
Yes,The RS232 port on the dam1021 is not occupied.
* I understand that the Transformers are not includet. What I didn't get is the choise I have for a 230V country...
There are selected jumpers on the main board.
* I believe in the advantage of oversized power supplies instead of just enough power supplies For what reason do I need one or two Transformers?
The main board is designed for 2 transformers.
* Do I have to solde ranything else on your motherboard then the transformers?
The transformers and part of the connectors need to do it yourself.
* Where do I connect a (un) balanced headphone? Is there a auto recognition for these to silence the RCA / XLR connectors than?
If you want to connect the headphone, you need to connect it yourself. There is a reserved wiring hole on the main board.
Yes, please connect to I2S by definition.
* The shown cable connecting the pcb usb-Port with the piggyback Amanero board is included?
included
* If I want to change the SW within the dan1021 dac I still have to solder/ connect a seperate rs232 cable to the Soekris board, right?
Yes,The RS232 port on the dam1021 is not occupied.
* I understand that the Transformers are not includet. What I didn't get is the choise I have for a 230V country...
There are selected jumpers on the main board.
* I believe in the advantage of oversized power supplies instead of just enough power supplies For what reason do I need one or two Transformers?
The main board is designed for 2 transformers.
* Do I have to solde ranything else on your motherboard then the transformers?
The transformers and part of the connectors need to do it yourself.
* Where do I connect a (un) balanced headphone? Is there a auto recognition for these to silence the RCA / XLR connectors than?
If you want to connect the headphone, you need to connect it yourself. There is a reserved wiring hole on the main board.
Hi Audiozen,
Is there a possibility of using a paperwhite display such as this? I think they are really nice.
Thanks
James
2.9 inch E-Ink Display e-Paper Module for Raspberry Pi3 Arduino SPI interface SG | eBay
Is there a possibility of using a paperwhite display such as this? I think they are really nice.
Thanks
James
2.9 inch E-Ink Display e-Paper Module for Raspberry Pi3 Arduino SPI interface SG | eBay
Not supported. Voltage, the display resolution is different.
Any reconsiderations/plans to release updated firmware? I'd love something along the lines of being able to use the additional I/O pins so they can be toggled by remote control, ie, button to put a power amplifier into standby, switch an auxiliary input relay, etc. You have a great product here but it can be adapted to do much more.
Last edited:
- Home
- Vendor's Bazaar
- AZ OLED setup kits for Soekris dam1021/1121 control