Thank you !
Also If you happen to visit this sunny place... remenber to come and hear my evolutions.
Ricardo
Also If you happen to visit this sunny place... remenber to come and hear my evolutions.
Ricardo
Better dynamics and bass presence, ( PEH ? ) and since the Teflon make the input capacity value OK the whole is more fluent and natural, defo less harsh.
Usefull job, music deserve it 😉
Let's find a Playstation now...
Usefull job, music deserve it 😉
Let's find a Playstation now...
Back : I defo love it now ! Maybe go further later for fun... and music 😉
It's just so foot tapping !
It's just so foot tapping !
Shame we can't edit...
Where to look at now?
Blue Velvet ALPS pot?
Separated PSU for the opamp? ( 55V flows through a 2K
LM4562HA or even Burson type?
Better main PSU?
...
Where to look at now?
Blue Velvet ALPS pot?
Separated PSU for the opamp? ( 55V flows through a 2K
LM4562HA or even Burson type?
Better main PSU?
...
For Ricardo:
Yes as I was waiting for the Teflon as my K40Y-9 200V were not 0.492µF as sold but 0.442µF (and OEM Aura was 0.470µF MKCs and checked at 0.498 for one and 0.460 for the other ( don't remember well but not matched ) and I don't wanted to change that value.
First I wanted to fit just the PIOs. Then I needed to add caps to go to at least 0.470. PIO by itslef just sounds good in mids, bass and highs did not improved and my feeling is that they got less present. Less life to overall feeling.
Then the Teflon (2x 0.22µF 200V for the lid space, 0.470 FT-1 Teflon are just too big 😉 ) and the good value:
I think gone from the 0.442 PIO to 0.485 PIO+FT-1 does it for the bottom, and the magic of Teflon makes the highs soooo ... just nice 😉
As I said when you hold something good you just feel it : " OMG, that's just sooo good, don't touch anything there !! ".
before I was just asking myself is this amp was woth it, no I just love it!
But more than just that was done (remember the BHC 4700 changed for PEH169 6800 and NE55xx for LM4562 with ZA 220/35.).
The former post is still in my head, maybe a dedicated PSU for LM4562 then will go sheileded HA package... that can be quite cheap.
Yes as I was waiting for the Teflon as my K40Y-9 200V were not 0.492µF as sold but 0.442µF (and OEM Aura was 0.470µF MKCs and checked at 0.498 for one and 0.460 for the other ( don't remember well but not matched ) and I don't wanted to change that value.
First I wanted to fit just the PIOs. Then I needed to add caps to go to at least 0.470. PIO by itslef just sounds good in mids, bass and highs did not improved and my feeling is that they got less present. Less life to overall feeling.
Then the Teflon (2x 0.22µF 200V for the lid space, 0.470 FT-1 Teflon are just too big 😉 ) and the good value:
I think gone from the 0.442 PIO to 0.485 PIO+FT-1 does it for the bottom, and the magic of Teflon makes the highs soooo ... just nice 😉
As I said when you hold something good you just feel it : " OMG, that's just sooo good, don't touch anything there !! ".
before I was just asking myself is this amp was woth it, no I just love it!
But more than just that was done (remember the BHC 4700 changed for PEH169 6800 and NE55xx for LM4562 with ZA 220/35.).
The former post is still in my head, maybe a dedicated PSU for LM4562 then will go sheileded HA package... that can be quite cheap.
What rectifier may I use?
Good ref or spec I should find ( such as type of rectifier, as an IC with 4 or just 4 ones no prob there ) for the purpose is to feed as much as possible the bigger caps.
Offers are also welcome guys!
Thanks
Good ref or spec I should find ( such as type of rectifier, as an IC with 4 or just 4 ones no prob there ) for the purpose is to feed as much as possible the bigger caps.
Offers are also welcome guys!
Thanks
I've a new link:
http://www.zerogain.com/forum/showthread.php?t=3249
I've saved the pics also here in case...
If that can tells more about the opamp duty to someone... and the gain in changing it with a Audio GD module like Moon or Earth... and/or use a regulated PSU for the +/-13V.
Thanks!
http://www.zerogain.com/forum/showthread.php?t=3249
I've saved the pics also here in case...
An externally hosted image should be here but it was not working when we last tested it.
If that can tells more about the opamp duty to someone... and the gain in changing it with a Audio GD module like Moon or Earth... and/or use a regulated PSU for the +/-13V.
Thanks!
The opamp is in the way of the signal. It seems to perform some kind of differential service.
I would definitely replace it by a LME49720 (metal can) or a descrite device if I could bear the cost.
Ricardo
I would definitely replace it by a LME49720 (metal can) or a descrite device if I could bear the cost.
Ricardo
Hi Ricardo,
I do plan to fit an Audio GD Earth and a dedicated PSU for this and phono part (with switch to power on/off phono).
I try to figure the best and don't want to waste money by making steps like a LMxxxxHA 😉 Or only if I can get one as sample!
BTW aop Earth is a good choise as it's very neutral, maybe will go for further investigation in a CDP where a LMxxxHA can do good also, but that's another story (a cheap Onky CDP in my hands very soon 😉 °;
Matthieu
I do plan to fit an Audio GD Earth and a dedicated PSU for this and phono part (with switch to power on/off phono).
I try to figure the best and don't want to waste money by making steps like a LMxxxxHA 😉 Or only if I can get one as sample!
BTW aop Earth is a good choise as it's very neutral, maybe will go for further investigation in a CDP where a LMxxxHA can do good also, but that's another story (a cheap Onky CDP in my hands very soon 😉 °;
Matthieu
Hi MatthieuMalefoda said:
You gave me a very good idea... insert an on/off switch on the 101b riaa 😉
Where can i find the Audio GD Earth ?
Ricardo
http://www.audio-gd.com/enweb/pro/diy/OPA.htm
they are here!
The page is not so clear but price and shipping costs are on the left bottom.
The Earth as been proven to be the Burson V1.
Have a look at their clock and M12 output board... said to be a wonder!
Matthieu
they are here!
The page is not so clear but price and shipping costs are on the left bottom.
The Earth as been proven to be the Burson V1.
Have a look at their clock and M12 output board... said to be a wonder!
Matthieu
Thank you !
From what I can read in the net, I see the Earth has lower distortion the Burson V2.
Can we use these without output caps ? (V2 does it).
Are these Burson inspired chinese things ?
I am afraid that the overall cost of a Earth double opamp + shipping to Portugal + customs (60% more than parts cost) might make me tend to the bursons Brent is selling.
Please advise.
Ricardo
From what I can read in the net, I see the Earth has lower distortion the Burson V2.
Can we use these without output caps ? (V2 does it).
Are these Burson inspired chinese things ?
I am afraid that the overall cost of a Earth double opamp + shipping to Portugal + customs (60% more than parts cost) might make me tend to the bursons Brent is selling.
Please advise.
Ricardo
Hi Ricardo,
on a french audio forum a guy have both Burson V1 and Audio GD in hands, seems Audio GD is the real manufacturer of Burson V1! They are physically the same! And if you read weel you can find some clues but it's nowhere written black on white for it should be a business deal 😉
Also as for I've read now the Audio GD Earth ( or Burson V1 ) are very neutral and good " everywhere" when Moon and Sun V2 may be better or worst than even a LM4562 if not used in good conditions.
As for the DC blocking caps that's a problem I'll go to ask on this french form right now! The good behaviour of the LM4562 on this point is a good bonus.
About price that's another story, I'm not in a hurry but on a budget so I've someone in China right now who will buy what I want there and bring it back for me on plane. But I will consider Brent offer also as GBP is cheap these days!
I have to make up my mind for a "definitive" choice before order anything, wainting for my cdp and such. I hold that as a long term tune up of my stuff 😉 Customs should not be a concern for such a small parcel I think.
Back with some more answer soon 😉
on a french audio forum a guy have both Burson V1 and Audio GD in hands, seems Audio GD is the real manufacturer of Burson V1! They are physically the same! And if you read weel you can find some clues but it's nowhere written black on white for it should be a business deal 😉
Also as for I've read now the Audio GD Earth ( or Burson V1 ) are very neutral and good " everywhere" when Moon and Sun V2 may be better or worst than even a LM4562 if not used in good conditions.
As for the DC blocking caps that's a problem I'll go to ask on this french form right now! The good behaviour of the LM4562 on this point is a good bonus.
About price that's another story, I'm not in a hurry but on a budget so I've someone in China right now who will buy what I want there and bring it back for me on plane. But I will consider Brent offer also as GBP is cheap these days!
I have to make up my mind for a "definitive" choice before order anything, wainting for my cdp and such. I hold that as a long term tune up of my stuff 😉 Customs should not be a concern for such a small parcel I think.
Back with some more answer soon 😉
I see you are on a "lean" period and believe you are taking the correct decisions.
You might have noticed that my mods are also very slow.... I must learn a lot, and ask many questions before I decide the next thing to do due to the growing difficulty to earn €€€.
I am interested in replacing the opamp in my pre.... It does not use a cap in the output so I need a compatible discrete build. Looking forward to your findings.
Regards
Ricardo
You might have noticed that my mods are also very slow.... I must learn a lot, and ask many questions before I decide the next thing to do due to the growing difficulty to earn €€€.
I am interested in replacing the opamp in my pre.... It does not use a cap in the output so I need a compatible discrete build. Looking forward to your findings.
Regards
Ricardo