Parcels dispatched
Hi guys,
I dispatched the two parcels today, to Mark (UK / Europe) and Coulomb (Canada / USA).
Mark's should arrive tomorrow, Coulomb's in 3-4 days.
Then they're going to be busy 😉
Andy.
Hi guys,
I dispatched the two parcels today, to Mark (UK / Europe) and Coulomb (Canada / USA).
Mark's should arrive tomorrow, Coulomb's in 3-4 days.
Then they're going to be busy 😉
Andy.
Can't wait!
Excellent thanks Andy! Many thanks! 🙂
...and thanks to Mark and Coulomb.....and then we will ALL be busy!..
Cant wait! 😀
ALW said:
Excellent thanks Andy! Many thanks! 🙂
ALW said:
...and thanks to Mark and Coulomb.....and then we will ALL be busy!..
Cant wait! 😀
I have Bit's on my desk
Received ok many thanks Andy 😀
Henk & Anthony, the overseas shipments would not of been possible if it were not for the help that you have volunteered, I hope that your members are as grateful for your help as I am.
It is my intention to get them all in the post by Monday .
Spartacus & SineEra you requested that I supply the chips and fit them for you but both of you have so far failed to respond to my Emails regarding what chip (ad817 or ad825) that you require fitting to your pub's I will keep hold of your order until you contact me. .
Blitz, Bsyyu & Michi124. You have paid to have the chips fitted but I have received no chips from any of you, if they remain un-received by Monday 24th of may morning the Europe order will be posted and will include your pcb's without chips fitted.
Received ok many thanks Andy 😀
Henk & Anthony, the overseas shipments would not of been possible if it were not for the help that you have volunteered, I hope that your members are as grateful for your help as I am.
It is my intention to get them all in the post by Monday .
Spartacus & SineEra you requested that I supply the chips and fit them for you but both of you have so far failed to respond to my Emails regarding what chip (ad817 or ad825) that you require fitting to your pub's I will keep hold of your order until you contact me. .
Blitz, Bsyyu & Michi124. You have paid to have the chips fitted but I have received no chips from any of you, if they remain un-received by Monday 24th of may morning the Europe order will be posted and will include your pcb's without chips fitted.
It was my intention to get them in the post today.
I arrived at the post office at 16:45 and lined up for 25 minutes before getting to the counter (three people behind the counter only one serving).
Upon arrival at the counter I explained that I have one overseas parcel that I require signing for and insuring at £500 and 12 parcels that are uk with and average insurance value of £70 that also must be signed for.
I am then given slips to fill in with about enough room for a thumb print. Thirteen slips later I issue the parcels for weighing and I am then informed that the twelve uk parcels would only be insured for £30 with the attached forms so I would need to fill in these OTHER forms (why give me the wrong ones in the first place) they proceed then to point out that they close in 1.5 min’s.
Henk fortunately the counter assistant must have been listening to me for the first 30 seconds as they gave me the correct form for your order so your is on route.
So sorry UK guys but I will fill in the OTHER forms tonight and go to a different post office tomorrow.
For those of you reading this from outside rip off Britain. YES THE SERVICE IN THIS LITTLE ISLAND IS APPALLING.
I arrived at the post office at 16:45 and lined up for 25 minutes before getting to the counter (three people behind the counter only one serving).
Upon arrival at the counter I explained that I have one overseas parcel that I require signing for and insuring at £500 and 12 parcels that are uk with and average insurance value of £70 that also must be signed for.
I am then given slips to fill in with about enough room for a thumb print. Thirteen slips later I issue the parcels for weighing and I am then informed that the twelve uk parcels would only be insured for £30 with the attached forms so I would need to fill in these OTHER forms (why give me the wrong ones in the first place) they proceed then to point out that they close in 1.5 min’s.
Henk fortunately the counter assistant must have been listening to me for the first 30 seconds as they gave me the correct form for your order so your is on route.
So sorry UK guys but I will fill in the OTHER forms tonight and go to a different post office tomorrow.
For those of you reading this from outside rip off Britain. YES THE SERVICE IN THIS LITTLE ISLAND IS APPALLING.
Canada delivery
Anthony,
I've mailed you re: parcel status, but I'll include it here for information purposes, this is the somewhat cryptic status of the US / Canada delivery!
Parcel number: ****************
Status: In progress
Parcel tracks
Date Time Location Tracking Event
22-05-2004 12:30 International Hub Despatched from hub
22-05-2004 00:03 International Hub Sorted in hub
21-05-2004 03:10 International Hub Sorted in hub
20-05-2004 16:13 Tonbridge Depot Collected from customer
It's on it's way, somewhere 😉
Andy.
Anthony,
I've mailed you re: parcel status, but I'll include it here for information purposes, this is the somewhat cryptic status of the US / Canada delivery!
Parcel number: ****************
Status: In progress
Parcel tracks
Date Time Location Tracking Event
22-05-2004 12:30 International Hub Despatched from hub
22-05-2004 00:03 International Hub Sorted in hub
21-05-2004 03:10 International Hub Sorted in hub
20-05-2004 16:13 Tonbridge Depot Collected from customer
It's on it's way, somewhere 😉
Andy.
A nice little special delivery arrived yesterday with my boards in.
So gonna warm me old soldering iron up soon(when i find the schematic for the regulators,lost it somewhere.)
Thanks to Mark,ALW and all others who helped get this group buy going and assisting in sorting out postage etc.Many thanks
Smiffy🙂
So gonna warm me old soldering iron up soon(when i find the schematic for the regulators,lost it somewhere.)
Thanks to Mark,ALW and all others who helped get this group buy going and assisting in sorting out postage etc.Many thanks
Smiffy🙂
Andrew the North American shipment arrived at my office this morning. I will be sending out parcels over the next 2 weeks, I am behind on some other Forum projects due to the number of hours spent at work lately. Please bear with me.
Regards
Anthony
Regards
Anthony
That's a relief!
Did it manage to bypass any import duty etc.? I labelled it to try and avoid that, without being dishonest 😉
Andy.
Hi Coulomb,
Anytime you get around to sending the boards is fine 🙂 Thank you and the others for volunteering your time. Cheers!
Anytime you get around to sending the boards is fine 🙂 Thank you and the others for volunteering your time. Cheers!
Thanks
Received the boards this morning , in a little padded envelope.😀
Many thanks to Mark for his time and effort, and to ALW and everyone else involved .
Received the boards this morning , in a little padded envelope.😀
Many thanks to Mark for his time and effort, and to ALW and everyone else involved .
Coulomb said:
😀 😀 😀 😀 😀
Can't wait to receive my package. Thanks to everyone who is making this possible.
Ron
ALW said:
I received it without any additional charges being levied.
BTW Andrew can you email me the confirmation spread sheet I sent you a few months ago?
Anthony
The data sheet for the op-amps will tell you the answer; the AD825 isn't specced to run at 5V, the AD817 is. Since the op-amp supply is bootstrapped from the reg o/p you need an error amp that will start up and work at 5V.
Hence the AD797 isn't suitable either.
I'll also re-iterate this again, DO NOT USE the AD797 in this reg. It might give you nice looking specs, but it's far less stable and far more importantly it sounds worse than the cheaper AD825 for most analogue applications.
Andy.
- Status
- Not open for further replies.