Here are my BR-1 cabinet measurements:
Remember the Left – Right tweeter offsets are mirror images. Over at Parts Express a couple of people said the cabinet is 8 5/8” wide, not 8 ¾”. So I re-measured with digital calipers and got 8 47/64. That’s close enough to 8 ¾ for me.
- 8 ¾” W X 14 ¼” H X 11” D
- Tweeter center is 3 ¾” from top and offset ¾” horizontally
- Woofer center is 4 ¾” from bottom and centered horizontally
Remember the Left – Right tweeter offsets are mirror images. Over at Parts Express a couple of people said the cabinet is 8 5/8” wide, not 8 ¾”. So I re-measured with digital calipers and got 8 47/64. That’s close enough to 8 ¾ for me.
Will you be making the AAMs with the DC28 or the Morel tweeter? If the second, did you hear back from Dennis about the crossover?
Geoff
Geoff
Hello,
I made a sketch on a sheet of the known measurements and the distance between the centers of the two speakers is the one indicated in the manual so I would say it is perfect. I placed the central reflex at the same height as the tweeter. Sorry, I am starting to be a bit old, no CAD at the moment.
I made a sketch on a sheet of the known measurements and the distance between the centers of the two speakers is the one indicated in the manual so I would say it is perfect. I placed the central reflex at the same height as the tweeter. Sorry, I am starting to be a bit old, no CAD at the moment.
Attachments
I'll use DC28F with the crossover on Murphyblaster, I've heard Dennis but send crossover boards from US to Italy and pay taxees is too expensive for me.
Thanks for your help
Guglielmo
Thanks for your help
Guglielmo
Just remember the tweeter for the other speaker will be offset 3/4" in the other direction. According to PE staff the port is 1-1/2" diameter and 6" long.