Hallo all. I have used this circuit before on VU meters and it works fine. But now I have Sifam db meters that I want to use and this circuit adjusted on max can only drive them a third of their full scale. The resistance of the new meters are 5.5 Ohm. Any Ideas how to improve this circuit to drive them to full scale will be appreciated.Thanks for the reply's you all,
I found an easy circuit, I've tested it and it works fine ! Circuits Online - Schakelingen - VU meter It seems to work from the line inputs.
Regards
Hi Jan,
Here is the pdf of circuit I posted. I replaced the gnd plane with traces. Hope it is useful to you.
reg
Prasi
gerbers as per request by PM. I haven't tested it nor do I know anyone who has.
Attachments
> Rod Eliot board as a 404 message does not let me enter to his site?
Rod Elliott changed his server a few years ago.
Change sound.westhost.com to sound.whsites.net
This is the current link to the meter page:
VU And PPM Audio Metering
Rod Elliott changed his server a few years ago.
Change sound.westhost.com to sound.whsites.net
This is the current link to the meter page:
VU And PPM Audio Metering
Rod has changed web-hosts *again*.
Elliott Sound Products - The Audio Pages (Main Index)
VU And PPM Audio Metering
Elliott Sound Products - The Audio Pages (Main Index)
VU And PPM Audio Metering
Sorunsuz çalışıyor denedim eline sağlık teşekkürlerGerçekten hoş!. Bu arada yapacak daha iyi bir işim yoktu, yayınladığım ckt'nin düzenini yaptım.
kayıt
Prasi
English please.
Sorunsuz çalışıyor denedim eline sağlık teşekkürler
It works smoothly, I tried it, thank you
- Home
- Amplifiers
- Solid State
- Analog VU meter driver