Amp suggestions please for 58-0-58V power supply

[earjo951]

No, but not too far away. I'm using the Yale CEID maker space (Yale CEID) which is very cool.

 

[greierasul]

@geierasul: Nice idea to mount the power devices beneath the PCB. keeping the total footprint small. But won't it lead to mechanical stress at the devices when tightening them after soldering has been done?
Best regards!

I soldered the transistors after I fixed them mechanically. I fixed before the PCB too. The last operation is soldering. It is not simple at all but...

Here is the last SARA amplifier, it's a fully ballanced SARA-2016. 600VA and over 176.000uF

 

[dadod]

earjo951, you can order pcbs for 100W CFA here: https://www.diyaudio.com/forums/solid-state/243481-200w-mosfet-cfa-amp-146.html#post5959847
It can deliver up to 150W on 8 ohm. I use it to drive ORION loudspeakers.