Working B+ at terminal 13.5
Silent B+ at terminal 13.8
Tester is working with new battery
I think you have voltages that are mv listed as volts. Correct the voltages on the paper then repost it with the corrected values.
Attachments
Sorry about the readings but the last tester I just realized it could measure milli volts so here is the correct readings, should I still carry out #24
Attachments
Yes.
And you should understand that having to continue to look over ever changing information from you is not fun.
And you should understand that having to continue to look over ever changing information from you is not fun.
Carry out the test #24 outcome the amp works
Sorry about the back and forth with the info
So, the amp never malfunctions with the jumper in place?
I'll wait for you to check it repeatedly and will check back tomorrow.
I'll wait for you to check it repeatedly and will check back tomorrow.
Wuyh the jumper in place still no malfunctions, so is that q707 was defective or something else
Remove that jumper and do the same for Q545-Q548. ONE at a time until you find the troublemaker.
You are looking for the one, when jumped, the amp works without malfunctioning like it did when you jumped Q707.