What are the pros/cons in keeping or removing the magnet cap from the back of the Apair P7? I am building a golden ratio(slim classic GR-dMar-Ken) enclosure & ready to cut the brace notch planet 10 plans show the cap in place, O know the interior volume will "increase"- how will that effect sound? -reduce bass? Port out the front
Thanks
Thanks
Little if the measures i did with the A7.3 1 & 2 magnets.
The driver will be shallower without the second magnet.
I have only ever use dthis feature once, expressly to quickly reduce driver depth to fit it into Maeshowe after we adde dteh Eexotic air chamber bits (much faster than cutting a hole for the magnet in the damping felt.
I would just leave it on. All the box designs assume it.
dave
The driver will be shallower without the second magnet.
I have only ever use dthis feature once, expressly to quickly reduce driver depth to fit it into Maeshowe after we adde dteh Eexotic air chamber bits (much faster than cutting a hole for the magnet in the damping felt.
I would just leave it on. All the box designs assume it.
dave
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.