Aleph3 Output 0.2 Vdc

[xenofex]

Hi need help, it is normal Aleph3 without any source connected measure output voltage 0.2Vdc. TIA.

 

[Nisbeth]

0.2VDC is quite high. Did you short the input to ground while measuring or is it floating?EDIT: If floating, connect to GND and measure again 🙂

 

[xenofex]

0.2VDC is quite high. Did you short the input to ground while measuring or is it floating?EDIT: If floating, connect to GND and measure again 🙂

Hi Nisbeth,
Appreciate your help, after connected to the source CD player voltage drop to +/-70mVdc is this acceptable.

 

[Zen Mod]

it is OK

 

[xenofex]

it is OK

Thanks appreciate it

 

[Dennis Hui]

The Aleph 3's DC offset is specified at <100mV so your value within spec.

https://www.passlabs.com/wp-content/uploads/2020/05/a3man.pdf

 

[xenofex]

The Aleph 3's DC offset is specified at <100mV so your value within spec.

https://www.passlabs.com/wp-content/uploads/2020/05/a3man.pdf

Dennis thanks