0.2VDC is quite high. Did you short the input to ground while measuring or is it floating?EDIT: If floating, connect to GND and measure again 🙂
Hi Nisbeth,0.2VDC is quite high. Did you short the input to ground while measuring or is it floating?EDIT: If floating, connect to GND and measure again 🙂
Appreciate your help, after connected to the source CD player voltage drop to +/-70mVdc is this acceptable.
The Aleph 3's DC offset is specified at <100mV so your value within spec.
https://www.passlabs.com/wp-content/uploads/2020/05/a3man.pdf
https://www.passlabs.com/wp-content/uploads/2020/05/a3man.pdf
Dennis thanksThe Aleph 3's DC offset is specified at <100mV so your value within spec.
https://www.passlabs.com/wp-content/uploads/2020/05/a3man.pdf
- Home
- Amplifiers
- Pass Labs
- Aleph3 Output 0.2 Vdc